Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0158-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Swords Laboratories Unlimited Company [name of applicant in the original application: Swords Laboratories updated due to a notified corporate name change] Industrial use of the substance as a surfactant in the purification of the biopharmaceutical drug Orencia, used for the treatment of Rheumatoid Arthritis, Juvenile Idiopathic Arthritis and Adult Psoriatic Arthritis Commission decided Details
0201-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A.; Aguettant Diagnostics [name of co-applicant in the original application: “Delpharm Biotech” updated due to a notified corporate name change] Industrial use in formulation of kits, kit reagents and buffer solutions in two WITNESS and three SERELISA veterinary In Vitro Diagnostic devices (IVDs) used for detecting certain diseases in pets and farm animals Commission decided Details
0184-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lilly France S.A.S.; Eli Lilly Italia S.p.A. Industrial formulation (dilution) of a silicone solution containing 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated and its subsequent use as a lubricant in the manufacture of medicinal product delivery devices Commission decided Details
0143-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its detergent properties, used for the extraction of biological material which is further formulated and intended for clinical and industrial in vitro testing applications. Commission decided Details
0186-05 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.
Beckman Coulter GmbH
Beckman Coulter France S.A.S.
Beckman Coulter Česká republika s.r.o.
Beckman Coulter UK - [Application void as of 01/01/2021]
Beckman Coulter S.L.U;
Beckman Coulter SPA Italy
BC Distribution B.V
Downstream use of NPnEO-containing clinical laboratory products that require registration, licensing, approval and monitoring by country-based health authorities, designed for use in dedicated clinical chemistry, immunology, hematology and flow cytometry laboratory instruments and assays. Commission decided Details
0200-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Commission decided Details
0172-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Cytiva Sweden AB [name of applicant in the original application: GE Healthcare Bio-Sciences AB updated due to a notified change of corporate name] Industrial use of emulsifiers containing nonylphenols ethoxylated for the manufacture of chromatography resins used by the biopharmaceutical industry, food & beverage sector and academia Commission decided Details
0142-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - SEBIA Industrial use of 4-NPnEO for its detergent properties in the production of buffers and reagents in view of ensuring the positioning of specific proteins necessary for the interpretation of gel electrophoresis in vitro diagnostic tests results based on the determination of isoenzymes. Commission decided Details
0248-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - FYSOL SAS [name of applicant in the original application: OCV Chambéry France S.A.S. updated due to a notified legal entity change] Mixing by the Applicant of a NPnEO-containing epoxy resin, resulting in mixtures containing < 0.1% w/w of NPnEO for the manufacture of glass fiber articles for critical composite helicopter parts, that is exempt from authorisation under REACH Art. 56(6)(a) Commission decided Details
0171-06 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the production of proteins and the conjugation of latex beads, both being used as components or for the production of components of in vitro diagnostic (IVD) assays, research or quality control products and other, e.g. analytical applications (processes specified in Appendix 1 to the AoA) Commission decided Details
0200-08 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH; QIAGEN Ltd. [Application void as of 01/01/2021]; QIAGEN Manchester Ltd. [Application void as of 01/01/2021]; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for Life Sciences kits without regulatory impact of the product groups sample preparation, PCR and sequencing Commission decided Details
0207-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Chemetall GmbH; Chemetall PLC - [Application void as of 01/01/2021] The formulation of a hardener component containing NPE in Aerospace two-part polysulphide sealants. Commission decided Details
0207-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Chemetall GmbH; Chemetall PLC - [Application void as of 01/01/2021] Mixing, by Aerospace Companies and their associated supply chains, including the Applicant, of base polysulfide sealant components with NPE-containing hardener, resulting in mixtures containing < 0.1% w/w of NPE for Aerospace uses that are exempt from authorisation under REACH Art. 56(6)(a). Commission decided Details
0186-07 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.
Beckman Coulter GmbH
Beckman Coulter France S.A.S.
Beckman Coulter Česká republika s.r.o.
Beckman Coulter UK - [Application void as of 01/01/2021]
Beckman Coulter S.L.U;
Beckman Coulter SPA Italy
BC Distribution B.V
Downstream use of NPnEO-containing laboratory products designed for use in flow cytometry, genomics and particle characterization laboratory instruments and assays for quality control and research and development. Commission decided Details
0180-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Bio-Rad Industrial use of 4-NPnEO for its non-ionic detergent properties in view of controlling reactions and chromatography support saturation required in the production of highly specific and sensitive in vitro immunoassays dedicated to the diagnosis of viral (HIV, HCV, Dengue) and parasitic infections Commission decided Details
0200-06 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH; QIAGEN Ltd. [Application void as of 01/01/2021]; QIAGEN Manchester Ltd. [Application void as of 01/01/2021]; QIAGEN Distribution B.V. Professional downstream use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits with regulatory impact of the product groups sample preparation, PCR, sequencing (and immunoassay for 4-tert-OPnEO only) Commission decided Details
0171-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Commission decided Details
0191-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Sekisui S-lec BV Roermond Industrial use as polymer additive in the manufacture of interlayer polymer films for laminated safety glass Commission decided Details
0239-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Prionics Lelystad B.V. Use as component of buffer solutions to produce antigens (Cell extraction, cell lysis, coating of biological antigens onto articles, inactivation of microorganisms that produce targeted antigen and solvent exchange) and in-process and final Quality Control of antigens intended for use as veterinary and human health laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications Commission decided Details
0185-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - IDEXX B.V. [name of the applicant in the original application: “IDEXX EUROPE B.V.” updated due to a notified corporate name change] Use of 4-Nonylphenol, branched and linear, ethoxylated in vitro diagnostic veterinary products (SNAP tests and ELISA Plate tests) as an ingredient in the wash solutions, sample diluents, control solutions, conjugate solutions, SNAP wash solutions, tissue soaking buffers and detection solutions Commission decided Details
0206-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Phadia GmbH; Thermo Fisher Scientific Baltics UAB Use as component of buffer solutions for the production of purified proteins (cell extraction, chromatographic purification and solvent exchange) and in-process and final Quality Control testing; intended for use as laboratory reagents in Scientific Research and Development and In Vitro Diagnostic applications at Thermo Fisher Scientific Baltics UAB Commission decided Details
0186-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.;
Beckman Coulter GmbH
Formulation of NPnEO solutions in European sites for use as laboratory products. Laboratory products are used as intermediate solutions for preparation of finished laboratory products (finished goods) or in-process use. Commission decided Details
0171-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Roche Diagnostics GmbH Use of Octyl- and Nonylphenolethoxylates in the formulation and filling of in vitro diagnostic (IVD) assays specified in Appendix 1 to the AoA. Commission decided Details
0200-04 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH Industrial use of 4-tert-OPnEO/4-NPnEO in the purification of biomaterial and blocking of non-specific bindings for the use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Commission decided Details
0049-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Micrometal GmbH The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components Commission decided Details
0073-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Veco B.V. Use of ammonium dichromate as photosensitive component in a polyvinyl alcohol photolithographic lacquer system for the manufacturing of mandrels which are used in nickel electroforming processes. Commission decided Details
0153-02 Initial Anthracene oil 292-602-7 90640-80-5 BILBAINA DE ALQUITRANES, S.A. Use of AO for manufacture of formulations for various industrial uses Commission decided Details
0151-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of AO for manufacture of formulations for various industrial uses Commission decided Details
0150-02 Initial Anthracene oil 292-602-7 90640-80-5 Koppers Denmark ApS Use of AO for manufacture of formulations for various industrial uses Commission decided Details
0152-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon bvba Use of AO for manufacture of formulations for various industrial uses Commission decided Details
0059-01 Initial Arsenic acid 231-901-9 7778-39-4 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided Details
0007-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Roxel (UK Rocket Motors) Ltd Industrial use of DEHP in manufacture of solid propellants and motor charges for rockets and tactical missiles Commission decided Details
0008-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Commission decided Details
0008-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce PVC articles Commission decided Details
0089-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug Commission decided Details
0088-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes). Commission decided Details
0217-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes) Commission decided Details
0278-01 Review report Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM Use as a process solvent in one step of manufacturing of an active pharmaceutical ingredient used in an anti-protozoal drug Commission decided Details
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided Details
0091-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Merck KGaA Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 Commission decided Details
0217-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes) Commission decided Details
0088-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes). Commission decided Details
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided Details
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided Details
0086-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Bracco Imaging s.p.a Use of bis(2-methoxyethyl) ether (diglyme) as a processing aid in the purification of 5-amino-2,4,6-triiodoisophthalic acid dichloride (EC 417- 220-1; CAS 37441-29-5) by precipitation Commission decided Details
0061-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Novartis Ringaskiddy Limited Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases Commission decided Details
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided Details
0235-01 Initial Chromic acid 231-801-5 7738-94-5 Neoperl GmbH The use of chromic acid in the functional electroplating of brass-made sanitary articles with the specific purpose of obtaining a final Cr(0) coating that provides a surface with high durability and chemical resistance. Commission decided Details
0053-01 Initial Chromic acid
231-801-5
236-881-5
13530-68-2
7738-94-5
Robert Bosch GmbH Hard chrome plating for gasoline and diesel injection applications Commission decided Details
0274-03 Initial Chromium trioxide 215-607-8 1333-82-0 ArcelorMittal France; ARCELORMITTAL ESPAÑA S.A. Use of Chromium (VI) Trioxide for Electrolytic Chromium Coating of Steel (ECCS); also known as Tin Free Steel (TFS) Commission decided Details
0057-03 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the black colour hard chromium plating of exterior surface of steel weapon barrel designed for military use, to ensure, during the whole gun barrel service life, stealth, erosion, corrosion and high temperature resistances in the condition of uses. Commission decided Details
0066-02 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating Commission decided Details
0050-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Friedberg GmbH Functional chrome plating of piston rings for two-stroke and four-stroke large bore engines as applied in the industrial sectors Construction & Industry, Power Generation, Railway and Maritime. Commission decided Details
0103-01 Initial Chromium trioxide 215-607-8 1333-82-0 Euro Cryospace France The use of chromium trioxide for the surface preparation of aluminium alloy cryogenic tanks used in the Ariane 5 launcher Commission decided Details
0095-02 Initial Chromium trioxide 215-607-8 1333-82-0 REGARTIS s.r.o. in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” [application transferred from: “REACHLaw” in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” due to a notified legal entity change] Functional Chrome Plating Commission decided Details
0283-01 Initial Chromium trioxide 215-607-8 1333-82-0 KYB SUSPENSIONS EUROPE, S.A.U.; KYB Manufacturing Czech s.r.o. Functional chrome plating of piston rods for shock absorbers for automotive applications Commission decided Details
0296-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE - Componentes de Motores, S.A. Chromium-trioxide-based functional chrome plating of piston rings for automotive applications Commission decided Details
0214-01 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Functional chrome plating using chromium trioxide in closed reactor systems for the establishment of a ‘conventional’ hard chrome coating on working rolls applied in the steel industry for the pre-manufacturing of cold-rolled, high-quality textured sheet metal Commission decided Details
0057-04 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics
Nexter Systems
Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. Commission decided Details
0068-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hoogovens Court Roll Surface Technologies V.O.F.
WAVEC GmbH
Trattamento Cilindri Laminazione S.r.l.
Walzen-Service-Center GmbH
NORD CHROME SAS
RHENAROLL SA
Texturing Technology Limited – [Decision discontinued as of 01/01/2021]
NC POLAND Sp.z. o.o.
Functional chrome plating of work rolls used in the steel and aluminium industry. Commission decided Details
0093-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of brass, bronze, copper and other copper alloys for medical engineering, aviation and automation products Commission decided Details
0255-02 Initial Chromium trioxide 215-607-8 1333-82-0 Chrom - Mueller Metallveredelung GmbH Industrial use of chromium trioxide in the hard chromium coating of complex outer surfaces of firearm auxiliary parts subject to mechanical, chemical and thermal stress in order to provide optimized sliding properties as well as heat, corrosion and wear resistance properties. Commission decided Details
0261-01 Initial Chromium trioxide 215-607-8 1333-82-0 Metalbrass s.r.l. Electroplating of metal substrates using chromium trioxide to achieve functional surfaces for the sanitary sector Commission decided Details
0133-02 Initial Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0250-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tenneco Automotive Ibérica The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Ibérica S.A in the functional chrome plating of shock absorber rods. Commission decided Details
0233-01 Initial Chromium trioxide 215-607-8 1333-82-0 Betz-Chrom GmbH Chromium trioxide-based functional chrome plating of components with diverse geometries and dimensions, requiring specialized equipment and process knowledge, for applications in demanding industry sectors such as mechanical engineering, metalworking and processing, aerospace, automotive, and medical technology. Commission decided Details
0132-02 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0067-01 Initial Chromium trioxide 215-607-8 1333-82-0 Abloy Oy Use of chromium trioxide in electroplating of mechanical and electromechanical cylinders, cam- and padlocks, electromechanical lock cases and architectural hardware. Commission decided Details
0215-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oras Oy
Oras Olesno Sp.z.o.o.
Electroplating of metal and plastic substrates using chromium trioxide to achieve functional surfaces for sanitary applications Commission decided Details
0221-01 Initial Chromium trioxide 215-607-8 1333-82-0 U. S. Steel Košice, s.r.o. Use of Chromium (VI) Trioxide for Passivation of Electrolytic Tinplate (ETP). Commission decided Details
0072-01 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas
“Amphenol Limited – [Decision discontinued as of 01/01/2021]
AMPHENOL SOCAPEX
ITT Cannon GmbH
Connecteurs Electriques Deutsch
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided Details
0130-01 Initial Chromium trioxide 215-607-8 1333-82-0 Dornbracht AG & Co. KG [name of applicant in the original application: Aloys F. Dornbracht GmbH & Co.KG updated due to a notified change of corporate name] Functional chrome plating with decorative character for sanitary applications Commission decided Details
0032-02 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change].
  • Atotech Deutschland GmbH & Co. KG [name of co-applicant in the original application: "Atotech Deutschland GmbH” updated due to a notified corporate name change]
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. [name of applicant in the original application: CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S. updated due to a notified change of corporate name];
  • Polychrome Holding B.V [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to notified changes of Only Representative and legal entity]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional Chrome Plating Commission decided Details
0238-01 initial Chromium trioxide 215-607-8 1333-82-0 Hueck-Engraving GmbH & Co.KG Functional chrome plating of high-quality stainless-steel press plates for the premium wood-based materials industry Commission decided Details
0133-01 Iitital Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD;
Ideal Standard Produktions-GmbH;
Jado Iberia-Produtos Metalurgicos Sociedade Unipessoal LDA (withdrawn)
Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Commission decided Details
0102-01 Initial Chromium trioxide 215-607-8 1333-82-0 Clariant Produkte (Deutschland) GmbH Use of chromium trioxide in a catalyst for the dehydrogenation of propane to propene Commission decided Details
0065-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines [name of applicant in the original application: SNECMA updated due to a notified change of corporate name] Industrial use of a chromium trioxide based surface treatment mixture applied on safety-critical rotating components of commercial and military aircraft engines, whose failure endangers airworthiness Commission decided Details
0095-04 Initial Chromium trioxide 215-607-8 1333-82-0 REGARTIS s.r.o. in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” [application transferred from: “REACHLaw” in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” due to a notified legal entity change] Surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Commission decided Details
0051-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Valvetrain GmbH Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. Commission decided Details
0071-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gerhardi Kunststofftechnik GmbH

C. Hübner GmbH

SAXONIA Galvanik GmbH

Simon Systems GmbH & Co. KG [name of co-applicant in the original application: Karl Simon GmbH & Co. KG updated due to a notified legal entity name change]

Galvanoplast Fischer Bohemia, s.r.o. [correction of the name of the original Applicant: Fischer GmbH & Co. surface technologies KG and of the successor Applicant: Fischer Surface Technologies GmbH]

Fischer Oberflächentechnologie GmbH [correction of the name of the original Applicant: Fischer GmbH & Co. surface technologies KG and of the successor Applicant: Fischer Surface Technologies GmbH]

WAFA Germany GmbH

Boryszew Oberflächentechnik Deutschland GmbH

Winning Plastics – Diepersdorf GmbH [application transferred from “Bolta Werke GmbH” due to a notified legal entity change.]

Heinze Gruppe GmbH

C+C Krug GmbH

BIA Kunststoff- und Galvanotechnik GmbH & Co KG

Aludec Galvanic s.a.
Plating on Plastics for Automotive Applications (PoPAA) Commission decided Details
0245-01 Initial Chromium trioxide 215-607-8 1333-82-0 NEWFORM S.P.A. Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Commission decided Details
0135-01 Initial Chromium trioxide 215-607-8 1333-82-0 Thyssenkrupp Electrical Steel GmbH;
Thyssenkrupp Electrical
Steel UGO S.A.S.
Surface treatment for the manufacture of grain-oriented electrical steel used in magnetic circuits of electric devices, in particular magnetic cores of high-performance transformers Commission decided Details
0251-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tenneco Automotive Europe BVBA The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Europe BVBA in the functional chrome plating of shock absorber rods. Commission decided Details
0285-01 Initial Chromium trioxide 215-607-8 1333-82-0 Liebherr-Aerospace Lindenberg GmbH Industrial use of chromium trioxide for functional chrome plating of actuation and landing gear systems for the aviation industry. Commission decided Details
0057-02 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. Commission decided Details
0095-01 Initial Chromium trioxide 215-607-8 1333-82-0 REGARTIS s.r.o. in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” [application transferred from: “REACHLaw” in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” due to a notified legal entity change] Formulation of mixtures of chromium trioxide for functional chrome plating, functional chrome plating with decorative character and surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Commission decided Details
0131-01 Initial Chromium trioxide 215-607-8 1333-82-0 Schell GmbH & Co. KG Armaturentechnologie Functional chrome plating with decorative character for sanitary applications Commission decided Details
0070-02 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
BROWNING VIANA, FABRICA DE ARMAS E ARTIGOS DE DESPORTO SA
Industrial use of chromium trioxide in the hard chromium coating of civilian firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide a low friction coefficient as well as heat, corrosion and wear resistance properties. Commission decided Details
0119-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Friedrichshafen AG Functional chrome plating of piston rods for automotive and rail applications Commission decided Details
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Commission decided Details
0220-02 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Functional chrome plating with decorative character for transportation applications. Commission decided Details
0069-01 Initial Chromium trioxide 215-607-8 1333-82-0 Topocrom GmbH TOPOCROM functional chrome plating in closed reactor systems for the establishment of adjustable hemispherical surface structures. Commission decided Details
0216-02 Initial Chromium trioxide 215-607-8 1333-82-0 Viega GmbH & Co. KG. [name of applicant in the original application: Viega Supply Chain GmbH & Co. KG updated due to a notified corporate name change] Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0058-01 Initial Chromium trioxide 215-607-8 1333-82-0 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of chromium trioxide for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided Details
0134-01 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Passivation of tinplated steel (ETP) Commission decided Details
0228-01 Initial Chromium trioxide 215-607-8 1333-82-0 Eaton S.R.L; Eaton Automotive Systems sp.zoo The use of Chromium Trioxide (EC 215-607-8) by Eaton Vehicle Group (Eaton) across two legal entities in the functional chrome plating of engine valves and valve actuation (“lash adjusters”) Commission decided Details
0244-02 Initial Chromium trioxide 215-607-8 1333-82-0 CROMAPLAST S.p.A. Industrial use of CrO3 in the chrome plating of automotive plastic components Commission decided Details
0256-01 Initial Chromium trioxide 215-607-8 1333-82-0 KaVo Dental GmbH Chromium trioxide based functional chrome plating of dental instruments applied by professionals for dental treatment Commission decided Details
0264-01 Initial Chromium trioxide 215-607-8 1333-82-0 CRISTINA SRL A SOCIO UNICO Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications. Commission decided Details
0032-01 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH & Co. KG [name of co-applicant in the original application: "Atotech Deutschland GmbH” updated due to a notified corporate name change]
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. [name of applicant in the original application: CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S. updated due to a notified change of corporate name];
  • Polychrome Holding B.V [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to notified changes of Only Representative and legal entity]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Formulation of mixtures Commission decided Details