Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0210-01 Initial Chromium trioxide 215-607-8 1333-82-0 C. Hübner GmbH The use of chromium trioxide in the etching of single-component (1K) plastic articles. Opinions adopted Details
0231-01 Initial Chromium trioxide 215-607-8 1333-82-0 Kesseboehmer Beschlagsysteme GmbH&Co.KG Use of chromium trioxide for decorative/functional application in the furniture, sanitary and automotive sector. Opinions adopted Details
0301-01 Initial Chromium trioxide 215-607-8 1333-82-0 LIBERTY GALATI SA [application transferred from original Applicant: "Liberty Liège Dudelange (BE)” due to a notified legal entity change] Use of Chromium (VI) Trioxide and Sodium Dichromate for Passivation of Electrolytic Tinplate (ETP) Commission decided Details
0254-01 Initial Chromium trioxide 215-607-8 1333-82-0 RATIER-FIGEAC Industrial use of chromium trioxide for functional chrome plating of aircraft safety critical steel ball screws used in airplane's actuators, to decrease friction ratio, and enhance wear, corrosion, and endurance resistance, enabling targeted service life Opinions adopted Details
0271-01 Initial Chromium trioxide 215-607-8 1333-82-0 Villeroy & Boch Gustavsberg AB FM Mattsson Mora Group AB The use of chromium trioxide for electroplating of metal substrates with the purpose to create a long-lasting high durability surface with bright look for kitchen and bathroom sanitary ware Opinions adopted Details
0279-01 Initial Chromium trioxide 215-607-8 1333-82-0 GalvanoPlus Srl Industrial use of chromium trioxide for functional chrome plating with decorative character of sanitary equipment Opinions adopted Details
0052-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal Mogul Burscheid GmbH Functional chrome plating of piston rings for automotive engines as applied in the segments light vehicle petrol, light vehicle diesel, middle range diesel and heavy duty Commission decided Details
0210-02 Initial Chromium trioxide 215-607-8 1333-82-0 C. Hübner GmbH The use of chromium trioxide in the selective etching of multi-component (2K/3K) plastic articles. Opinions adopted Details
0267-01 Initial Chromium trioxide 215-607-8 1333-82-0 SPGPrints B.V. Use of Cr(VI) in an integrated process to create a hard surface with selective adhesion properties on mandrels used to manufacture screens for Rotary Screen Printing (RSP) for textile and other (printing) applications Opinions adopted Details
0298-01 Initial Chromium trioxide 215-607-8 1333-82-0 Bjerringbro Fornikling A/S Electroplating (by a job plater) of metal substrates using chromium trioxide to achieve functional surfaces Opinions adopted Details
0318-01 Initial Chromium trioxide 215-607-8 1333-82-0 Sirio Galv S.R.L Industrial use of Chromium Trioxide for the functional chrome plating with decorative character for different applications. Commission decided Details
0335-01 Review report Chromium trioxide 215-607-8 1333-82-0 Boeing Distribution Deutschland GmbH; Chemservice GmbH - (B1P7); CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. Anodising using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0051-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Valvetrain GmbH Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. Commission decided Details
0273-01 Initial Chromium trioxide 215-607-8 1333-82-0 MIKRO METAL S.R.L. Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance Opinions adopted Details
0343-01 Review report Chromium trioxide 215-607-8 1333-82-0 Boeing Distribution Deutschland GmbH; Chemservice GmbH - (B1P7); CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. Pre-treatments: Deoxidising, pickling, etching and/or desmutting using chromium trioxide or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0146-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tata Steel UK Ltd - [Application void as of 01/01/2021] The use of Chromium (VI) Trioxide for the manufacture of Electrolytic Chromium/Chromium oxide Coated Steel (ECCS) Application void as of 01 January 2021 Details
0327-01 Initial Chromium trioxide 215-607-8 1333-82-0 Henkel Global Supply Chain B.V. Chemical conversion coating using chromium trioxide, sodium dichromate and/or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0057-01 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament steels parts which are thermomechanically stressed and in contact with oxidizing gas at high temperature, so as to ensure a thermal barrier with high melting point, resistance to wear and oxidation associated with weapons as well as resistance to impact and atmospheric corrosion. Commission decided Details
0064-03 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category II. Opinions adopted Details
0285-02 Initial Chromium trioxide 215-607-8 1333-82-0 Liebherr-Aerospace Lindenberg GmbH Industrial use of chromium trioxide for surface treatment of aluminium alloys for applications in the aerospace industries unrelated to functional chrome plating Opinions adopted Details
0295-01 Initial Chromium trioxide 215-607-8 1333-82-0 Ugitech Saint-Etienne Industrial use of chromium trioxide for the functional chrome plating of stainless-steel bars, mainly designed to be cylinder rods, used in aggressive and corrosive environments in diverse sectors such as transportation Opinions adopted Details
0244-02 Initial Chromium trioxide 215-607-8 1333-82-0 CROMAPLAST S.p.A. Industrial use of CrO3 in the chrome plating of automotive plastic components Opinions adopted Details
0135-01 Initial Chromium trioxide 215-607-8 1333-82-0 Thyssenkrupp Electrical Steel GmbH;
Thyssenkrupp Electrical
Steel UGO S.A.S.
Surface treatment for the manufacture of grain-oriented electrical steel used in magnetic circuits of electric devices, in particular magnetic cores of high-performance transformers Commission decided Details
0219-01 Initial Chromium trioxide 215-607-8 1333-82-0 Husqvarna AB Industrial use of a mixture containing Chromium Trioxide in functional chrome plating of the saw chain cutter links in order to meet stay sharp and durability requirements for use with chainsaws. Commission decided Details
0256-01 Initial Chromium trioxide 215-607-8 1333-82-0 KaVo Dental GmbH Chromium trioxide based functional chrome plating of dental instruments applied by professionals for dental treatment Opinions adopted Details
0268-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rubinetteria Paffoni S.p.A. Functional chrome plating with decorative character of metal substrates for sanitary applications Opinions adopted Details
0266-01 Initial Chromium trioxide 215-607-8 1333-82-0 OLIVARI B SPA Electroplating of brass substrates using chromium trioxide to achieve functional surfaces for architectural fittings Opinions adopted Details
0303-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rubinetterie Stella S.p.A Electroplating of metal substrates using chromium trioxide to achieve functional surfaces for the sanitary sector Opinions adopted Details
0321-01 Initial Chromium trioxide 215-607-8 1333-82-0 LMC S.r.l. Industrial use of Chromium Trioxide for the functional chrome plating of food slicer’s circular blades. Opinion development Details
0032-03 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH & Co. KG [name of co-applicant in the original application: "Atotech Deutschland GmbH” updated due to a notified corporate name change]
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. [name of applicant in the original application: CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S. updated due to a notified change of corporate name];
  • Polychrome Holding B.V [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to notified changes of Only Representative and legal entity]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional chrome plating with decorative character Opinions adopted Details
0209-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines Industrial use of chromium trioxide-based mixtures for the surface treatment of legacy spare parts of military aircraft engines, including safety-critical parts whose failure endangers airworthiness Commission decided Details
0057-02 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. Commission decided Details
0210-03 Initial Chromium trioxide 215-607-8 1333-82-0 C. Hübner GmbH The use of chromium trioxide in the functional electroplating of single-component (1K) and multi-component (2K/3K) plastic articles with the specific aim of obtaining a final Cr(0) coating with high durability and chemical resistance while preserving the lightweight nature of the plastic component. Opinions adopted Details
0228-01 Initial Chromium trioxide 215-607-8 1333-82-0 Eaton S.R.L; Eaton Automotive Systems sp.zoo The use of Chromium Trioxide (EC 215-607-8) by Eaton Vehicle Group (Eaton) across two legal entities in the functional chrome plating of engine valves and valve actuation (“lash adjusters”) Commission decided Details
0233-01 Initial Chromium trioxide 215-607-8 1333-82-0 Betz-Chrom GmbH Chromium trioxide-based functional chrome plating of components with diverse geometries and dimensions, requiring specialized equipment and process knowledge, for applications in demanding industry sectors such as mechanical engineering, metalworking and processing, aerospace, automotive, and medical technology. Opinions adopted Details
0324-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tecnofiniture S.r.l. Industrial use of chromium trioxide for the hard-chrome plating of a wide variety of items with large dimensions and complex geometries used in energy generation and supply, off-shore oil and gas extraction and manufacturing industries. Opinions adopted Details
0346-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Landing Systems; TSM; REVETEMENT DE CHROME DUR; SOCIETE TECHNIQUE D'ETUDES ET DE GESTION; SABENA TECHNICS BOD; OMA S.P.A.; Metal Sud s.r.l; Safran Landing Systems Services; Compañia Española de Sistemas Aeronauticos, (C.E.S.A.), S.A.U.; Aerostar S.A. Industrial use of chromium trioxide for hard chrome plating to provide key functional properties such as wear resistance (...) in the manufacturing of landing and braking system parts for aeronautical applications exclusively supplied by Safran Landing Systems without technical limitations with the identified alternative. Opinion development Details
0119-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Friedrichshafen AG Functional chrome plating of piston rods for automotive and rail applications Commission decided Details
0064-02 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category III. Opinions adopted Details
0342-01 Review report Chromium trioxide 215-607-8 1333-82-0 Boeing Distribution Deutschland GmbH; CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S.; Chemservice GmbH - (B1P7) Passivation of (non-Al) metallic coatings using chromium trioxide or sodium dichromate or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0131-01 Initial Chromium trioxide 215-607-8 1333-82-0 Schell GmbH & Co. KG Armaturentechnologie Functional chrome plating with decorative character for sanitary applications Commission decided Details
0260-01 Initial Chromium trioxide 215-607-8 1333-82-0 Sarrel Sarreliber - Transformação de Plásticos e Metais, S.A Industrial use of chromium trioxide for the etching of plastics materials, as a pre-treatment step of the electroplating process, for automotive applications mostly Opinions adopted Details
0312-02 Initial Chromium trioxide 215-607-8 1333-82-0 Metalplast sas; CO.BE. sas di Colombo Nadia e Flavia Industrial use of chromium trioxide for plating on plastic materials to create a long-lasting high durability chromium decorative surface in the electroplating process for various applications. Opinion development Details
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Commission decided Details
0064-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in dissolved and solid form to produce aqueous solutions of any composition for industrial application. Opinions adopted Details
0069-01 Initial Chromium trioxide 215-607-8 1333-82-0 Topocrom GmbH TOPOCROM functional chrome plating in closed reactor systems for the establishment of adjustable hemispherical surface structures. Commission decided Details
0220-02 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Functional chrome plating with decorative character for transportation applications. Opinions adopted Details
0294-02 Initial Chromium trioxide 215-607-8 1333-82-0 Kludi GmbH & Co. KG Pre-treatment (“etching”) of plastic substrates using chromium trioxide in electroplating processes for sanitary applications Opinions adopted Details
0306-01 Initial Chromium trioxide 215-607-8 1333-82-0 GALVANICA PASOTTI THEA S.R.L.; CHINO COLOR S.r.l. Industrial use of chromium trioxide for functional chrome plating with decorative character of items for the sanitary, hydro-sanitary, taps, household industries, and various other applications (such as handles/locks, pneumatic elements and electrical connection). Opinions adopted Details
0323-01 Initial Chromium trioxide 215-607-8 1333-82-0 HDO Druckguß- und Oberflächentechnik GmbH; HDO SK s.r.o. Electroplating (by a long-term contractual supplier) of metal substrates using chromium trioxide to achieve functional surfaces with decorative character. Opinion development Details
0058-01 Initial Chromium trioxide 215-607-8 1333-82-0 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of chromium trioxide for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided Details
0070-02 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
BROWNING VIANA, FABRICA DE ARMAS E ARTIGOS DE DESPORTO SA
Industrial use of chromium trioxide in the hard chromium coating of civilian firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide a low friction coefficient as well as heat, corrosion and wear resistance properties. Commission decided Details
0216-02 Initial Chromium trioxide 215-607-8 1333-82-0 Viega GmbH & Co. KG. [name of applicant in the original application: Viega Supply Chain GmbH & Co. KG updated due to a notified corporate name change] Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0269-01 Initial Chromium trioxide 215-607-8 1333-82-0 RUBINETTERIE 3M SRL Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications. Opinions adopted Details
0095-01 Initial Chromium trioxide 215-607-8 1333-82-0 REGARTIS s.r.o. in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” [application transferred from: “REACHLaw” in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” due to a notified legal entity change] Formulation of mixtures of chromium trioxide for functional chrome plating, functional chrome plating with decorative character and surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Commission decided Details
0134-01 Initial Chromium trioxide 215-607-8 1333-82-0 ThyssenKrupp Rasselstein GmbH Use of Chromium (VI) Trioxide for Passivation of tinplated steel (ETP) Commission decided Details
0212-02 Initial Chromium trioxide 215-607-8 1333-82-0 LARS Chemie, spol. s r.o.
CASTELCROM SRL; MATRIDOS S.L.U; PLATING BRAP S.A.U.
Industrial use of chromium trioxide for the functional chrome plating with decorative character for automotive and sanitary industry Opinions adopted Details
0093-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of brass, bronze, copper and other copper alloys for medical engineering, aviation and automation products Commission decided Details
0133-02 Initial Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0220-01 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Chromium trioxide-based etching as pre-treatment step for electroplating of plastics for transportation applications. Opinions adopted Details
0251-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tenneco Automotive Europe BVBA The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Europe BVBA in the functional chrome plating of shock absorber rods. Opinions adopted Details
0286-04 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of components with complex 3-dimensional geometry (not axially/rotationally symmetrical) requiring high wear resistant surfaces to withstand abrasive forces occurring in their application Opinions adopted Details
0289-02 Initial Chromium trioxide 215-607-8 1333-82-0 Fabbrica d'armi Pietro Beretta SPA Chromium trioxide based functional chrome plating of gun barrel bores and auxiliary parts for semi-automatic shotguns, over/under, side-by-side shotguns, pistols and carbines for civilian uses. Opinions adopted Details
0310-01 Initial Chromium trioxide 215-607-8 1333-82-0 Cromotecnica FIDA S.r.l. Functional chrome plating of hydraulic cylinders, stems, pistons and rollers using chromium trioxide Opinion development Details
0326-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Anodising using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0337-02 Review report Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S.; Chemservice GmbH - (B1P7); Boeing Distribution Deutschland GmbH Chemical conversion coating using chromium trioxide, sodium dichromate, potassium dichromate and/or dichromium tris(chromate) in aerospace and defence industry and its supply chains Opinion development Details
0307-01 Initial Chromium trioxide 215-607-8 1333-82-0 VINZIA F.lli S.p.A. Industrial use of chromium trioxide for functional chrome plating with the decorative character of brass or stainless-steel drain components for the tap industry to provide thickness, corrosion resistance Opinions adopted Details
0347-01 Initial Chromium trioxide 215-607-8 1333-82-0 Safran Aircraft Engines Industrial use of slurry mixtures containing chromium trioxide for the surface treatment of aircraft engines parts including turbines and compressors Opinion development Details
0354-01 Review report Chromium trioxide 215-607-8 1333-82-0 Airbus Helicopters Technik GmbH Use as a surface hardener (functional chrome plating) in the manufacture of helicopter transmissions and the maintenance of helicopters. Opinion development Details
0218-02 Initial Chromium trioxide 215-607-8 1333-82-0 DOURECA - Produtos Plásticos, Lda. Industrial use of chromium trioxide to create a long-lasting and high durability chromium decorative surface on plastic substrates in the electroplating process for automotive applications. Opinions adopted Details
0264-01 Initial Chromium trioxide 215-607-8 1333-82-0 CRISTINA SRL A SOCIO UNICO Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications. Commission decided Details
0057-04 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics
Nexter Systems
Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. Commission decided Details
0263-01 Initial Chromium trioxide 215-607-8 1333-82-0 Orelec Industrial use of chromium trioxide for the hard chrome plating of injection moulds in order to provide hardness, wear resistance and good demoulding properties, critical for the manufacture of high-quality plastic parts. Opinions adopted Details
0214-01 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Functional chrome plating using chromium trioxide in closed reactor systems for the establishment of a ‘conventional’ hard chrome coating on working rolls applied in the steel industry for the pre-manufacturing of cold-rolled, high-quality textured sheet metal Commission decided Details
0315-01 Initial Chromium trioxide 215-607-8 1333-82-0 Egal srl Industrial use of chromium trioxide for the pre-treatment step (etching) in the electroplating process of small sized plastic items for various sectors Opinion development Details
0319-01 Initial Chromium trioxide 215-607-8 1333-82-0 SK Nexilis Poland sp. z o.o. Manufacture of passivated copper foil used in Lithium-ion batteries (LiB). Opinion development Details
0359-01 Review report Chromium trioxide 215-607-8 1333-82-0 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of chromium trioxide for the treatment of copper foil used in the manufacture of printed circuit board. Opinion development Details
0068-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hoogovens Court Roll Surface Technologies V.O.F.
WAVEC GmbH
Trattamento Cilindri Laminazione S.r.l.
Walzen-Service-Center GmbH
NORD CHROME SAS
RHENAROLL SA
Texturing Technology Limited – [Decision discontinued as of 01/01/2021]
NC POLAND Sp.z. o.o.
Functional chrome plating of work rolls used in the steel and aluminium industry. Commission decided Details
0276-01 Initial Chromium trioxide 215-607-8 1333-82-0 Sc OsmaPlast Romania SRL Industrial use of hexavalent chromium for a pre-treatment step (etching) in the electroplating process for various applications. Opinion development Details
0254-02 Initial Chromium trioxide 215-607-8 1333-82-0 RATIER-FIGEAC Industrial use of chromium trioxide for the chromic acid anodizing of aluminium spars as critical surface preparation phase for bonding with aircraft safety critical propeller blades to secure reliable bonding performance and enhance spars corrosion resistance Opinions adopted Details
0293-01 Initial Chromium trioxide 215-607-8 1333-82-0 Talleres Aykrom, S.A. Industrial use of Chromium Trioxide in functional chrome plating of metallic pieces required in different industrial sectors such as corrugated rolls to meet hardness, wear resistance, corrosion resistance, good surface condition, low friction coefficient and coating adhesion requirements Opinions adopted Details
0322-01 Initial Chromium trioxide 215-607-8 1333-82-0 ArcelorMittal Belgium NV/SA Industrial use of chromium trioxide for functional chrome plating of work rolls for use in the production of flat metal products Opinions adopted Details
0221-01 Initial Chromium trioxide 215-607-8 1333-82-0 U. S. Steel Košice, s.r.o. Use of Chromium (VI) Trioxide for Passivation of Electrolytic Tinplate (ETP). Commission decided Details
0328-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O Chromate rinsing after phosphating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0067-01 Initial Chromium trioxide 215-607-8 1333-82-0 Abloy Oy Use of chromium trioxide in electroplating of mechanical and electromechanical cylinders, cam- and padlocks, electromechanical lock cases and architectural hardware. Commission decided Details
0250-01 Initial Chromium trioxide 215-607-8 1333-82-0 Tenneco Automotive Ibérica The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Ibérica S.A in the functional chrome plating of shock absorber rods. Opinions adopted Details
0257-01 Initial Chromium trioxide 215-607-8 1333-82-0 QUALIPAC Aurillac; Etablissements R.GRAINDORGE Industrial use of chromium trioxide for the etching of polypropylene (PP) substrates, as a pre-treatment step of the electroplating process, for the luxury sector and other applications Opinions adopted Details
0292-01 Initial Chromium trioxide 215-607-8 1333-82-0 Artech SRL Industrial use of chromium trioxide for the functional chrome plating with decorative character of steel tubes and plates incorporated in machines for the agri-food industry, leisure, household furniture and automotive industries Opinions adopted Details
0329-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Electroplating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0072-01 Initial Chromium trioxide 215-607-8 1333-82-0 Souriau sas
“Amphenol Limited – [Decision discontinued as of 01/01/2021]
AMPHENOL SOCAPEX
ITT Cannon GmbH
Connecteurs Electriques Deutsch
TE UK Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided Details
0313-01 Initial Chromium trioxide 215-607-8 1333-82-0 BWI Poland Technologies Sp. z. o.o Industrial use of chromium trioxide for the functional chrome plating of shock absorber rods and strut rods, cylinders and reservoir tubes mounted on passive or semi-active dampers for automotive applications Opinions adopted Details
0320-01 Initial Chromium trioxide 215-607-8 1333-82-0 Fratelli Creola S.r.l. Use of chromium trioxide for electroplating of metal substrates with the purpose to creating a long-lasting high durability surface with bright (shiny) or matte look for sanitary and industrial applications Opinion development Details
0132-02 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0215-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oras Oy
Oras Olesno Sp.z.o.o.
Electroplating of metal and plastic substrates using chromium trioxide to achieve functional surfaces for sanitary applications Commission decided Details
0330-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Inorganic finish stripping using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0338-01 Review report Chromium trioxide 215-607-8 1333-82-0 Boeing Distribution Deutschland GmbH; Chemservice GmbH - (B1P7); CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. Chromate rinsing after phosphating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0032-02 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change].
  • Atotech Deutschland GmbH & Co. KG [name of co-applicant in the original application: "Atotech Deutschland GmbH” updated due to a notified corporate name change]
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. [name of applicant in the original application: CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S. updated due to a notified change of corporate name];
  • Polychrome Holding B.V [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to notified changes of Only Representative and legal entity]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional Chrome Plating Commission decided Details
0238-01 initial Chromium trioxide 215-607-8 1333-82-0 Hueck-Engraving GmbH & Co.KG Functional chrome plating of high-quality stainless-steel press plates for the premium wood-based materials industry Commission decided Details
0275-01 Initial Chromium trioxide 215-607-8 1333-82-0 SICROM S.r.l. Functional chrome plating of hydraulic cylinders and swivel joints using chromium trioxide Opinions adopted Details
0305-01 Initial Chromium trioxide 215-607-8 1333-82-0 Meoni e Bartoletti S.p.A. Use of Chromium Trioxide for the hard-chrome plating of hydraulic and pneumatic cylinders for various applications, and inner tubes of motorbike front suspension for the automotive industry. Opinion development Details