Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0186-07 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.
Beckman Coulter GmbH
Beckman Coulter France S.A.S.
Beckman Coulter Česká republika s.r.o.
Beckman Coulter UK - [Application void as of 01/01/2021]
Beckman Coulter S.L.U;
Beckman Coulter SPA Italy
BC Distribution B.V
Downstream use of NPnEO-containing laboratory products designed for use in flow cytometry, genomics and particle characterization laboratory instruments and assays for quality control and research and development. Commission decided Details
0207-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Chemetall GmbH; Chemetall PLC - [Application void as of 01/01/2021] The formulation of a hardener component containing NPE in Aerospace two-part polysulphide sealants. Commission decided Details
0317-01 Initial Acids generated from chromium trioxide and their oligomers - - Micron srl Dilution of chromic acid solution at concentrations lower than 0.1% for the use in passivation baths Opinions adopted Details
0106-02 Initial Ammonium dichromate 232-143-1 7789-09-5 Display Technologies Limited - [Decision discontinued as of 01/01/2021] Industrial use of Ammonium Dichromate in the process of manufacturing Cathode Ray Tubes for head up displays intended to be used in military and civilian aircrafts Discontinued as of 01 January 2021 Details
0073-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Veco B.V. Use of ammonium dichromate as photosensitive component in a polyvinyl alcohol photolithographic lacquer system for the manufacturing of mandrels which are used in nickel electroforming processes. Commission decided Details
0106-01 Initial Ammonium dichromate 232-143-1 7789-09-5 BAE Systems (Operations) Limited – [Decision discontinued as of 01/01/2021]
Qioptiq Ltd – [Decision discontinued as of 01/01/2021]
Industrial use of Ammonium Dichromate in the process of manufacturing holographic combiners for diffractive head-up displays intended to be used in military aircrafts Discontinued as of 01 January 2021 Details
0049-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Micrometal GmbH The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components Commission decided Details
0150-02 Initial Anthracene oil 292-602-7 90640-80-5 Koppers Denmark ApS Use of AO for manufacture of formulations for various industrial uses Commission decided Details
0152-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon bvba Use of AO for manufacture of formulations for various industrial uses Commission decided Details
0151-02 Initial Anthracene oil 292-602-7 90640-80-5 Rain Carbon Germany GmbH [name of applicant in the original application: RÜTGERS Germany GmbH updated due to a notified change of corporate name] Use of AO for manufacture of formulations for various industrial uses Commission decided Details
0153-02 Initial Anthracene oil 292-602-7 90640-80-5 BILBAINA DE ALQUITRANES, S.A. Use of AO for manufacture of formulations for various industrial uses Commission decided Details
0059-01 Initial Arsenic acid 231-901-9 7778-39-4 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided Details
0352-02 Initial Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 Baxter SA; Baxter Healthcare SA; Gambro Dasco SpA; Baxter (Malta) Trading Co Ltd Use of DEHP-containing plastics for immediate packaging of medicinal products Opinion development Details
0352-03 Initial Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 Baxter SA; Baxter Healthcare SA; Gambro Dasco SpA; Baxter (Malta) Trading Co Ltd Use of DEHP-based mixtures as a lubricating/sealing agent for the insertion of port closures into empty bags and assembly/connection of parts, that are used in immediate packaging of medicines Opinion development Details
0352-01 Initial Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 Baxter SA; Baxter Healthcare SA; Gambro Dasco SpA; Baxter (Malta) Trading Co Ltd; Colorite Europe Ltd. (withdrawn) Formulation of DEHP mixtures for application in immediate packaging of medicines and medical devices Opinion development Details
0007-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Roxel (UK Rocket Motors) Ltd Industrial use of DEHP in manufacture of solid propellants and motor charges for rockets and tactical missiles Authorisation expired Details
0004-03 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use of DEHP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Withdrawn Details
0001-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Rolls-Royce plc – [Decision discontinued as of 01/01/2021] The processing of a stop-off formulation containing DEHP during the diffusion bonding and manufacture of aero engine fan blades. Discontinued as of 01 January 2021 Details
0008-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Authorisation expired Details
0002-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 ARKEMA FRANCE Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn Details
0008-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce PVC articles Authorisation expired Details
0002-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 ARKEMA FRANCE Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn Details
0004-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn Details
0004-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn Details
0003-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn Details
0003-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn Details
0088-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes). Commission decided Details
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided Details
0089-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug Commission decided Details
0217-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes) Commission decided Details
0091-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Merck KGaA Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 Commission decided Details
0217-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes) Commission decided Details
0088-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes). Commission decided Details
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided Details
0086-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Bracco Imaging s.p.a Use of bis(2-methoxyethyl) ether (diglyme) as a processing aid in the purification of 5-amino-2,4,6-triiodoisophthalic acid dichloride (EC 417- 220-1; CAS 37441-29-5) by precipitation Commission decided Details
0061-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Novartis Ringaskiddy Limited Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases Commission decided Details
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided Details
0084-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Roche Diagnostics GmbH Use of diglyme as a process chemical in the manufacture of one specific type of Dynabeads® used in immunodiagnostic assays (in vitro diagnostic) Commission decided Details
0053-01 Initial Chromic acid
231-801-5
236-881-5
13530-68-2
7738-94-5
Robert Bosch GmbH Hard chrome plating for gasoline and diesel injection applications Commission decided Details
0235-01 Initial Chromic acid 231-801-5 7738-94-5 Neoperl GmbH The use of chromic acid in the functional electroplating of brass-made sanitary articles with the specific purpose of obtaining a final Cr(0) coating that provides a surface with high durability and chemical resistance. Commission decided Details
0100-02 Initial Chromium trioxide 215-607-8 1333-82-0 Airbus Helicopters Technik GmbH [name of applicant in the original application: “ZF Luftfahrttechnik GmbH” updated due to a notified corporate name change] Surface treatment for applications in the aeronautics and aerospace industries (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Commission decided Details
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted Details
0070-01 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
MANROY ENGINEERING LTD – [Decision discontinued as of 01/01/2021]
Industrial use of chromium trioxide in the hard chromium coating of military small- and medium-caliber firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide hardness, heat resistance and thermal barrier properties, as well as corrosion resistance, adhesion and low friction properties Commission decided Details
0300-01 Initial Chromium trioxide 215-607-8 1333-82-0 WEBER-HYDRAULIK GMBH Chromium trioxide-based functional chrome plating of solid and hollow piston rods for hydraulic applications Opinions adopted Details
0056-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rimex Metals (UK) Ltd – [Decision discontinued as of 01/01/2021] Use of chromium trioxide as an oxidising and hardening agent in the manufacture of coloured stainless steel Discontinued as of 01 January 2021 Details
0234-01 Initial Chromium trioxide 215-607-8 1333-82-0 Maschinenfabrik Kaspar Walter GmbH & Co KG Formulation of chromium trioxide-based electrolyte for electroplating process. Commission decided Details
0276-02 Initial Chromium trioxide 215-607-8 1333-82-0 Sc OsmaPlast Romania SRL Industrial use of hexavalent chromium to create a long-lasting and high durability chromium decorative surface on plastic substrates in the electroplating process for various applications Opinions adopted Details
0253-01 Initial Chromium trioxide 215-607-8 1333-82-0 GEA Westfalia Separator Group GmbH Chromium trioxide-based functional chrome plating of machine components for centrifugal separator and decanter centrifuges Commission decided Details
0267-01 Initial Chromium trioxide 215-607-8 1333-82-0 SPGPrints B.V. Use of Cr(VI) in an integrated process to create a hard surface with selective adhesion properties on mandrels used to manufacture screens for Rotary Screen Printing (RSP) for textile and other (printing) applications Commission decided Details
0280-02 Initial Chromium trioxide 215-607-8 1333-82-0 TECNOCROM INDUSTRIAL, S.A.;ALLION ESPAÑOLA S.A.; CROMADO INDUSTRIAL SARRASIN S.L.; CROMECAL, S.L. ; Talleres Acro, S. L. [name of the applicant in the original application: Talleres Acro, S.A. updated due to a change of corporate name]; DUROKROM, SL; IkanKronitek, S.L.; CROMO DURO ANFER S.A.; GIROCLAD, SL; OVIDICROM S.L.; RECTIFICADOS DELVAL S.A; REQUEL S.L.; Talleres Durocrom S. L.; TALLERES GUMILA, S.L. Functional chrome plating of parts with complex surface geometry and requiring the use of an auxiliary anode Opinions adopted Details