Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid. 

 

There are currently no ongoing consultations.
 
0169-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Janssen Vaccines & Prevention BV
Janssen Biologics B.V.
4-tert-Octylphenol ethoxylate is used as a lysing agent for the permeabilization of the host cell membrane to release adenovirus particles used for the manufacture of vaccines. Its use allows the selective elimination of enveloped adventitious viruses and is compatible with the chemicals needed to control the host cell DNA precipitation in the next process step. Commission decided Details
0325-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Anodise sealing using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0336-01 Review report Chromium trioxide 215-607-8 1333-82-0 CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S.; Boeing Distribution Deutschland GmbH; Chemservice GmbH - (B1P7) Anodise sealing using chromium trioxide, potassium dichromate, sodium chromate and/or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0336-04 Review report Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O; Brenntag Chemicals Distribution (Ireland) Ltd Anodise sealing using chromium trioxide, potassium dichromate, sodium chromate and/or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0336-03 Review report Sodium chromate 231-889-5 7775-11-3 HAAS GROUP INTERNATIONAL SP. Z.O.O; Boeing Distribution Deutschland GmbH Anodise sealing using chromium trioxide, potassium dichromate, sodium chromate and/or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0336-02 Review report Sodium dichromate 234-190-3 10588-01-9 HAAS GROUP INTERNATIONAL SP. Z.O.O; AD International BV; Brenntag Chemicals Distribution (Ireland) Ltd Anodise sealing using chromium trioxide, potassium dichromate, sodium chromate and/or sodium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0326-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Anodising using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0335-01 Review report Chromium trioxide 215-607-8 1333-82-0 Boeing Distribution Deutschland GmbH; Chemservice GmbH - (B1P7); CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. Anodising using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0046-02 Initial Strontium chromate 232-142-6 7789-06-2 AKZO Nobel Car Refinishes B.V.; Habich GmbH; Henkel Global SupplyChain B.V.; Ramboll Belgium BVBA [application transferred from: “Indestructible Paint Ltd.” due to a notified legal entity change]; Finalin GmbH; Mapaero; PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]; PPG Industries (UK) Ltd; PPG Coatings SA; Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name] Application of paints, primers and specialty coatings containing Strontium Chromate in the construction of aerospace and aeronautical parts, including aeroplanes / helicopters, spacecraft, satellites, launchers, engines, and for the maintenance of such constructions. Commission decided Details
0361-01 Initial tetraethyllead 201-075-4 78-00-2 Trafigura Ventures V.B.V. Blending of TEL in Avgas formulations Opinion development Details
0327-01 Initial Chromium trioxide 215-607-8 1333-82-0 Henkel Global Supply Chain B.V. Chemical conversion coating using chromium trioxide, sodium dichromate and/or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0327-02 Initial Potassium dichromate 231-906-6 7778-50-9 HAAS GROUP INTERNATIONAL SP. Z.O.O Chemical conversion coating using chromium trioxide, sodium dichromate and/or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0327-03 Initital Sodium dichromate 234-190-3 10588-01-9 HAAS GROUP INTERNATIONAL SP. Z.O.O Chemical conversion coating using chromium trioxide, sodium dichromate and/or potassium dichromate in aerospace and defence industry and its supply chains Opinion development Details
0337-02 Review report Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S.; Chemservice GmbH - (B1P7); Boeing Distribution Deutschland GmbH Chemical conversion coating using chromium trioxide, sodium dichromate, potassium dichromate and/or dichromium tris(chromate) in aerospace and defence industry and its supply chains Opinion development Details
0337-01 Review report Dichromium tris(chromate) 246-356-2 24613-89-6 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Chemical conversion coating using chromium trioxide, sodium dichromate, potassium dichromate and/or dichromium tris(chromate) in aerospace and defence industry and its supply chains Opinion development Details
0337-03 Review report Potassium dichromate 231-906-6 7778-50-9 Brenntag Chemicals Distribution (Ireland) Ltd Chemical conversion coating using chromium trioxide, sodium dichromate, potassium dichromate and/or dichromium tris(chromate) in aerospace and defence industry and its supply chains Opinion development Details
0337-04 Review report Sodium dichromate 234-190-3 10588-01-9 Brenntag Chemicals Distribution (Ireland) Ltd; AD International BV Chemical conversion coating using chromium trioxide, sodium dichromate, potassium dichromate and/or dichromium tris(chromate) in aerospace and defence industry and its supply chains Opinion development Details
0338-01 Review report Chromium trioxide 215-607-8 1333-82-0 Boeing Distribution Deutschland GmbH; Chemservice GmbH - (B1P7); CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. Chromate rinsing after phosphating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0328-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O Chromate rinsing after phosphating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0256-01 Initial Chromium trioxide 215-607-8 1333-82-0 KaVo Dental GmbH Chromium trioxide based functional chrome plating of dental instruments applied by professionals for dental treatment Opinions adopted Details
0289-02 Initial Chromium trioxide 215-607-8 1333-82-0 Fabbrica d'armi Pietro Beretta SPA Chromium trioxide based functional chrome plating of gun barrel bores and auxiliary parts for semi-automatic shotguns, over/under, side-by-side shotguns, pistols and carbines for civilian uses. Opinions adopted Details
0316-01 Initial Chromium trioxide 215-607-8 1333-82-0 ASO Cromsteel S.A.; FDF S.r.l. Chromium trioxide based functional chrome plating of semi-finished steel products (bars, cylinder tubes and linear shafts) for the manufacture of hydraulic and pneumatic components Opinions adopted Details
0289-01 Initial Chromium trioxide 215-607-8 1333-82-0 Fabbrica d'armi Pietro Beretta SPA Chromium trioxide based functional plating of gun barrel bores and auxiliary parts for assault rifles, carbines and pistols for non-civilian uses. Opinions adopted Details
0220-01 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Chromium trioxide-based etching as pre-treatment step for electroplating of plastics for transportation applications. Commission decided Details
0286-02 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring high wear resistant surfaces to withstand abrasive forces occurring in their application Opinions adopted Details
0286-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Heinrich Schnarr GmbH; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of axially/rotationally symmetrical components requiring optimal tribological surface properties (resulting from microcracked surface) to ensure low surface friction under lubrication Opinions adopted Details
0286-04 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of components with complex 3-dimensional geometry (not axially/rotationally symmetrical) requiring high wear resistant surfaces to withstand abrasive forces occurring in their application Opinions adopted Details
0286-03 Initial Chromium trioxide 215-607-8 1333-82-0 Hartchrom-beck GmbH.; Kreft & Röhrig GmbH; Rudolf Jatzke Galvanik-Hartchrom Günter Holthöfer GmbH & Co. KG; Johann Maffei GmbH & Co. KG; Schornberg Galvanik GmbH; Wissing Hartchrom GmbH Chromium trioxide-based functional chrome plating of components with complex 3-dimensional geometry (not axially/rotationally symmetrical) requiring optimal tribological surface properties ( resulting from microcracked surface) to ensure low surface friction under lubrication Opinions adopted Details
0233-01 Initial Chromium trioxide 215-607-8 1333-82-0 Betz-Chrom GmbH Chromium trioxide-based functional chrome plating of components with diverse geometries and dimensions, requiring specialized equipment and process knowledge, for applications in demanding industry sectors such as mechanical engineering, metalworking and processing, aerospace, automotive, and medical technology. Opinions adopted Details
0234-02 Initial Chromium trioxide 215-607-8 1333-82-0 Maschinenfabrik Kaspar Walter GmbH & Co KG Chromium trioxide-based functional chrome plating of cylinders used in the rotogravure printing and embossing industry. Commission decided Details
0282-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hazet Werk Hermann Zerver GmbH & Co. KG Chromium trioxide-based functional chrome plating of hand tools to achieve a high level of abrasion resistance as well as corrosion and chemical resistance Opinions adopted Details
0258-01 Initial Chromium trioxide 215-607-8 1333-82-0 Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH Chromium trioxide-based functional chrome plating of large components and small components with complex geometries and/or requiring special approval procedures for their application in demanding sectors such as medical, aerospace, defence and mining industry Opinions adopted Details
0253-01 Initial Chromium trioxide 215-607-8 1333-82-0 GEA Westfalia Separator Group GmbH Chromium trioxide-based functional chrome plating of machine components for centrifugal separator and decanter centrifuges Opinions adopted Details
0258-02 Initial Chromium trioxide 215-607-8 1333-82-0 Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH Chromium trioxide-based functional chrome plating of small components with simple geometries not requiring special approval procedures for their application in demanding sectors such as hydraulic systems, food, paper and chemical industry Opinions adopted Details
0300-01 Initial Chromium trioxide 215-607-8 1333-82-0 WEBER-HYDRAULIK GMBH Chromium trioxide-based functional chrome plating of solid and hollow piston rods for hydraulic applications Opinions adopted Details
0296-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE - Componentes de Motores, S.A. Chromium-trioxide-based functional chrome plating of piston rings for automotive applications Opinions adopted Details
0206-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Phadia GmbH; B∙R∙A∙H∙M∙S GmbH Coating Thyroid Stimulating Hormone Receptor onto articles used as components of IVD reagent systems at B∙R∙A∙H∙M∙S GmbH and Phadia GmbH Commission decided Details
0317-01 Initial Acids generated from chromium trioxide and their oligomers - - Micron srl Dilution of chromic acid solution at concentrations lower than 0.1% for the use in passivation baths Opinions adopted Details
0012-08 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Distribution and mixing pigment powder in an industrial environment into liquid or solid premix to colour plastic/plasticised articles for non consumer use Commission decided Details
0012-07 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Distribution and mixing pigment powder in an industrial environment into liquid or solid premix to colour plastic/plasticised articles for non consumer use Commission decided Details
0012-02 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Distribution and mixing pigment powder in an industrial environment into solvent-based paints for non-consumer use Commission decided Details
0012-01 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Distribution and mixing pigment powder in an industrial environment into solvent-based paints for non-consumer use Commission decided Details
0197-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - MERCK MILLIPORE LIMITED Downstream use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as component of mixed cellulose ester membranes. Commission decided Details
0186-05 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.
Beckman Coulter GmbH
Beckman Coulter France S.A.S.
Beckman Coulter Česká republika s.r.o.
Beckman Coulter UK - [Application void as of 01/01/2021]
Beckman Coulter S.L.U;
Beckman Coulter SPA Italy
BC Distribution B.V
Downstream use of NPnEO-containing clinical laboratory products that require registration, licensing, approval and monitoring by country-based health authorities, designed for use in dedicated clinical chemistry, immunology, hematology and flow cytometry laboratory instruments and assays. Commission decided Details
0186-07 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.
Beckman Coulter GmbH
Beckman Coulter France S.A.S.
Beckman Coulter Česká republika s.r.o.
Beckman Coulter UK - [Application void as of 01/01/2021]
Beckman Coulter S.L.U;
Beckman Coulter SPA Italy
BC Distribution B.V
Downstream use of NPnEO-containing laboratory products designed for use in flow cytometry, genomics and particle characterization laboratory instruments and assays for quality control and research and development. Commission decided Details
0186-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc.
Immunotech S.R.O.
Beckman Coulter France S.A.S.
Beckman Coulter Česká republika s.r.o.;
Beckman Coulter UK - [Application void as of 01/01/2021]
Beckman Coulter S.L.U
Beckman Coulter SPA Italy
BC Distribution B.V
Downstream use of OPnEO-containing clinical laboratory products that require registration, licensing, approval and monitoring by country-based health authorities, designed for use in dedicated clinical chemistry, immunology, hematology and flow cytometry laboratory instruments and assays. Commission decided Details
0186-06 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc.
Immunotech S.R.O
Immunotech S.A.S.
Beckman Coulter France S.A.S.
Beckman Coulter Česká republika s.r.o.
Beckman Coulter UK - [Application void as of 01/01/2021]
Beckman Coulter S.L.U
Beckman Coulter SPA Italy;
BC Distribution B.V
Downstream use of OPnEO-containing laboratory products designed for use in flow cytometry, genomics and particle characterization laboratory instruments and assays for quality control and research and development. Commission decided Details
0298-01 Initial Chromium trioxide 215-607-8 1333-82-0 Bjerringbro Fornikling A/S Electroplating (by a job plater) of metal substrates using chromium trioxide to achieve functional surfaces Opinions adopted Details
0323-01 Initial Chromium trioxide 215-607-8 1333-82-0 HDO Druckguß- und Oberflächentechnik GmbH; HDO SK s.r.o. Electroplating (by a long-term contractual supplier) of metal substrates using chromium trioxide to achieve functional surfaces with decorative character. Opinion development Details
0266-01 Initial Chromium trioxide 215-607-8 1333-82-0 OLIVARI B SPA Electroplating of brass substrates using chromium trioxide to achieve functional surfaces for architectural fittings Opinions adopted Details
0273-01 Initial Chromium trioxide 215-607-8 1333-82-0 MIKRO METAL S.R.L. Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance Opinions adopted Details
0133-01 Iitital Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD;
Ideal Standard Produktions-GmbH;
Jado Iberia-Produtos Metalurgicos Sociedade Unipessoal LDA (withdrawn)
Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Commission decided Details
0284-01 Initial Chromium trioxide 215-607-8 1333-82-0 C.G.S. SRL Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Opinions adopted Details
0277-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rubinetterie Ritmonio Srl Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Commission decided Details
0245-01 Initial Chromium trioxide 215-607-8 1333-82-0 NEWFORM S.P.A. Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Opinions adopted Details
0132-01 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Commission decided Details
0269-01 Initial Chromium trioxide 215-607-8 1333-82-0 RUBINETTERIE 3M SRL Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications. Commission decided Details
0264-01 Initial Chromium trioxide 215-607-8 1333-82-0 CRISTINA SRL A SOCIO UNICO Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications. Commission decided Details
0216-01 Initial Chromium trioxide 215-607-8 1333-82-0 Viega GmbH & Co. KG. [name of applicant in the original application: Viega Supply Chain GmbH & Co. KG updated due to a notified corporate name change] Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright silvery appearance for sanitary applications Commission decided Details
0215-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oras Oy
Oras Olesno Sp.z.o.o.
Electroplating of metal and plastic substrates using chromium trioxide to achieve functional surfaces for sanitary applications Commission decided Details
0303-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rubinetterie Stella S.p.A Electroplating of metal substrates using chromium trioxide to achieve functional surfaces for the sanitary sector Opinions adopted Details
0261-01 Initial Chromium trioxide 215-607-8 1333-82-0 Metalbrass s.r.l. Electroplating of metal substrates using chromium trioxide to achieve functional surfaces for the sanitary sector Opinions adopted Details
0272-01 Initial Chromium trioxide 215-607-8 1333-82-0 RIGHI S.p.A. Electroplating of metal substrates using chromium trioxide to achieve functional surfaces for the sanitary sector Opinions adopted Details
0339-01 Review report Chromium trioxide 215-607-8 1333-82-0 Boeing Distribution Deutschland GmbH; Chemservice GmbH - (B1P7); CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. Electroplating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0329-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Electroplating using chromium trioxide in aerospace and defence industry and its supply chains Opinion development Details
0270-02 Initial Chromium trioxide 215-607-8 1333-82-0 MAIER S. COOP. MAIER CZ s.r.o.; MAIER CROMOPLASTICA S.p.A Etching of plastics with chromium trioxide as pre-treatment step for electroplating of plastics for automotive applications Opinions adopted Details
0133-02 Initial Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0132-02 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0216-02 Initial Chromium trioxide 215-607-8 1333-82-0 Viega GmbH & Co. KG. [name of applicant in the original application: Viega Supply Chain GmbH & Co. KG updated due to a notified corporate name change] Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Commission decided Details
0095-01 Initial Chromium trioxide 215-607-8 1333-82-0 REGARTIS s.r.o. in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” [application transferred from: “REACHLaw” in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” due to a notified legal entity change] Formulation of mixtures of chromium trioxide for functional chrome plating, functional chrome plating with decorative character and surface treatment (except ETP) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering Commission decided Details
0200-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - QIAGEN GmbH; STAT-Dx Life S.L. Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Commission decided Details
0200-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - QIAGEN GmbH Formulation and filling of buffer solutions containing 4-tert-OPnEO/4-NPnEO for the manufacturing of and use in in-vitro Diagnostic and Life Sciences kits of the product groups sample preparation, PCR and sequencing Commission decided Details
0139-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Ortho-Clinical Diagnostics - [Application void as of 01/01/2021] Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) for use in the manufacture of in vitro diagnostic VITROS® products used for infectious disease screening, endocrinology, and oncology testing. Application void as of 01 January 2021 Details
0163-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) into enhancement solutions and DELFIA standard and maintenance solutions used in In Vitro Diagnostic assays and RUO products as well as maintenance of instruments as a critical ingredient for detection process while measuring europium (or other lanthanide) content of the assay solution Commission decided Details
0188-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Wallac Oy Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated (as Triton X-100) for use in the assay buffer for the GSP® Neonatal GALT kit used for the semi-quantitative determination of galactose-1-phosphate uridyl transferase (GALT) activity Commission decided Details
0185-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - IDEXX Montpellier SAS Formulation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated in the manufacture of sample diluents and standard solutions used in in vitro diagnostic veterinary ELISA Plate tests used for the detection of infectious diseases in livestock and poultry Commission decided Details
0090-01 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Formulation of an epoxy resin hardener containing technical MDA Commission decided Details
0234-01 Initial Chromium trioxide 215-607-8 1333-82-0 Maschinenfabrik Kaspar Walter GmbH & Co KG Formulation of chromium trioxide-based electrolyte for electroplating process. Commission decided Details
0004-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn Details
0003-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn Details
0002-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 ARKEMA FRANCE Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn Details
0352-01 Initial Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 Baxter SA; Baxter Healthcare SA; Gambro Dasco SpA; Baxter (Malta) Trading Co Ltd; Colorite Europe Ltd. (withdrawn) Formulation of DEHP mixtures for application in immediate packaging of medicines and medical devices Opinion development Details
0011-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Linxens France SA Formulation of diarsenic trioxide into a mixture Commission decided Details
0013-01 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Formulation of flame retarded expanded polystyrene (EPS) to solid unexpanded pellets using hexabromocyclododecane as the flame retardant additive (for onward use in building applications) Authorisation expired Details
0360-01 Initial 2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate 239-622-4 15571-58-1 Galata Chemicals GmbH; REAGENS SPA Formulation of liquid mixtures containing DOTE Opinion development Details
0118-01 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name];
Finalin GmbH
Formulation of mixture Commission decided Details
0032-01 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH & Co. KG [name of co-applicant in the original application: "Atotech Deutschland GmbH” updated due to a notified corporate name change]
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. [name of applicant in the original application: CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S. updated due to a notified change of corporate name];
  • Polychrome Holding B.V [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to notified changes of Only Representative and legal entity]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Formulation of mixtures Commission decided Details
0045-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA Henkel Global SupplyChain B.V. Formulation of Mixtures Commission decided Details
0121-01 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Indestructible Paint Ltd. – [Decision discontinued as of 01/01/2021] Formulation of mixtures Commission decided Details
0044-01 Initial Potassium dichromate 231-906-6 7778-50-9 Brenntag Chemicals Distribution (Ireland) Ltd [application transferred from original Applicant: Brenntag UK Ltd due to a notified legal entity change] Formulation of Mixtures Commission decided Details
0047-01 Initial Potassium hydroxyoctaoxodizincatedichromate 234-329-8 11103-86-9 PPG Europe B.V. in its legal capacity as Only Representative of PPG Industries (UK) Ltd. - OR23 [application transferred from original Applicant: “PPG Industries (UK) Ltd” due to a notified change of Only Representative]; Finalin GmbH; PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc. [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]; PPG Coatings SA; Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name] Formulation of Mixtures Commission decided Details
0043-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Brenntag Chemicals Distribution (Ireland) Ltd [application transferred from original Applicant: Brenntag UK Ltd due to a notified legal entity change]
Henkel AG & Co. KGaA
AD International BV
Formulation of Mixtures Commission decided Details
0046-01 Initial Strontium chromate 232-142-6 7789-06-2 AKZO Nobel Car Refinishes B.V.; Habich GmbH; Henkel Global SupplyChain B.V.; Indestructible Paint Ltd. – [Decision discontinued as of 01/01/2021]; Finalin GmbH; Mapaero; PPG Europe B.V. in its legal capacity as Only Representative of PRC DeSoto International Inc [application transferred from original Applicant: “PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc.” due to a notified change of Only Representative]; PPG Industries (UK) Ltd; PPG Coatings SA; Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]; Formulation of Mixtures Commission decided Details
0062-01 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Formulation of mixtures of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Commission decided Details
0099-01 Initial Sodium chromate 231-889-5 7775-11-3
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • HAAS GROUP INTERNATIONAL SP. Z.O.O [application transferred from: “Wesco Aircraft EMEA, LTD” due to a notified legal entity change. Previously application transferred from original applicant: Haas Group International SCM Ltd due to a notified legal entity change]
Formulation of Mixtures of sodium chromate for sealing after anodizing, chemical conversion coating, pickling and etching applications by aerospace companies and their suppliers Commission decided Details
0063-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Formulation of mixtures of sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films; and the electrolytic passivation of tin plated steel for the packaging industry. Commission decided Details
0331-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAAS GROUP INTERNATIONAL SP. Z.O.O; Henkel Global Supply Chain B.V. Formulation of mixtures with soluble Cr(VI) compounds for use in aerospace and defence industry and its supply chains for surface treatments Opinion development Details
0341-01 Review report Chromium trioxide 215-607-8 1333-82-0 Boeing Distribution Deutschland GmbH; CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S.; Chemservice GmbH - (B1P7) Formulation of mixtures with soluble Cr(VI) compounds for use in aerospace and defence industry and its supply chains for surface treatments Opinion development Details
0341-02 Review report Potassium dichromate 231-906-6 7778-50-9 Brenntag Chemicals Distribution (Ireland) Ltd Formulation of mixtures with soluble Cr(VI) compounds for use in aerospace and defence industry and its supply chains for surface treatments Opinion development Details
0341-03 Review report Sodium chromate 231-889-5 7775-11-3 Boeing Distribution Deutschland GmbH; HAAS GROUP INTERNATIONAL SP. Z.O.O Formulation of mixtures with soluble Cr(VI) compounds for use in aerospace and defence industry and its supply chains for surface treatments Opinion development Details
0341-04 Review report Sodium dichromate 234-190-3 10588-01-9 Brenntag Chemicals Distribution (Ireland) Ltd; AD International BV Formulation of mixtures with soluble Cr(VI) compounds for use in aerospace and defence industry and its supply chains for surface treatments Opinion development Details
0186-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Beckman Coulter Ireland Inc.;
Beckman Coulter GmbH
Formulation of NPnEO solutions in European sites for use as laboratory products. Laboratory products are used as intermediate solutions for preparation of finished laboratory products (finished goods) or in-process use. Commission decided Details
0186-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc.;
Immunotech S.R.O.;
Immunotech S.A.S.
Formulation of OPnEO solutions in European sites for use as laboratory products. Laboratory products are used as intermediate solutions for preparation of finished laboratory products (finished goods) or in-process use. Commission decided Details
0360-02 Initial 2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate 239-622-4 15571-58-1 Galata Chemicals GmbH; REAGENS SPA; PMC Vlissingen Netherlands B.V. Formulation of PVC dry mixtures (granules and pellets) containing DOTE Opinion development Details
0123-01 Review report Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 Plastic Planet srl Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Opinions adopted Details
0122-01 Review report Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 VINYLOOP
FERRARA
S.p.A.
Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Withdrawn Details
0008-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 VINYLOOP FERRARA S.p.A.; Stena Recycling AB; Plastic Planet srl Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Authorisation expired Details
0362-01 Initial tetraethyllead 201-075-4 78-00-2 Warter Fuels Spółka Akcyjna FUEL FORMULATION WITH ADDED TETRAETHYL LEAD Opinion development Details
0100-01 Initial Chromium trioxide 215-607-8 1333-82-0 Airbus Helicopters Technik GmbH [name of applicant in the original application: “ZF Luftfahrttechnik GmbH” updated due to a notified corporate name change] Functional chrome plating Commission decided Details
0055-01 Initial Chromium trioxide 215-607-8 1333-82-0 CROMOMED S.A.
CRONOR S.A.
Cromo Europa S.A.
CHROMATLANTIQUE INDUSTRIEL
VILA ELECTROQUIMICAS.A.
Functional Chrome Plating Commission decided Details
0032-02 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change].
  • Atotech Deutschland GmbH & Co. KG [name of co-applicant in the original application: "Atotech Deutschland GmbH” updated due to a notified corporate name change]
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. [name of applicant in the original application: CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S. updated due to a notified change of corporate name];
  • Polychrome Holding B.V [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to notified changes of Only Representative and legal entity]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional Chrome Plating Commission decided Details
0095-02 Initial Chromium trioxide 215-607-8 1333-82-0 REGARTIS s.r.o. in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” [application transferred from: “REACHLaw” in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” due to a notified legal entity change] Functional Chrome Plating Commission decided Details
0066-01 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Functional chrome plating for aerospace applications for civil and military uses, comprising coating of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components Commission decided Details
0302-01 Initial Chromium trioxide 215-607-8 1333-82-0 Thoma Metallveredelung GmbH Functional chrome plating for hydraulic applications, other cylindrical components and further industrial applications Opinion development Details
0238-01 initial Chromium trioxide 215-607-8 1333-82-0 Hueck-Engraving GmbH & Co.KG Functional chrome plating of high-quality stainless-steel press plates for the premium wood-based materials industry Commission decided Details
0275-01 Initial Chromium trioxide 215-607-8 1333-82-0 SICROM S.r.l. Functional chrome plating of hydraulic cylinders and swivel joints using chromium trioxide Opinions adopted Details
0310-01 Initial Chromium trioxide 215-607-8 1333-82-0 Cromotecnica FIDA S.r.l. Functional chrome plating of hydraulic cylinders, stems, pistons and rollers using chromium trioxide Opinion development Details
0314-01 Initial Chromium trioxide 215-607-8 1333-82-0 Benoni S.r.l.; Cromatura Cristofoletti s.r.l. Functional chrome plating of mechanical components (including hydraulic cylinders, columns, moulds and various machinery parts) using chromium trioxide Opinions adopted Details
0288-01 Initial Chromium trioxide 215-607-8 1333-82-0 Leonardo S.p.A. Functional chrome plating of military gun barrels and outer jacket surfaces using chromium trioxide Opinions adopted Details
0280-01 Initial Chromium trioxide 215-607-8 1333-82-0 TECNOCROM INDUSTRIAL, S.A.;ALLION ESPAÑOLA S.A.; CROMADO INDUSTRIAL SARRASIN S.L.; CROMECAL, S.L. ; Talleres Acro, S. L. [name of the applicant in the original application: Talleres Acro, S.A. updated due to a change of corporate name]; DUROKROM, SL; IkanKronitek, S.L.; CROMO DURO ANFER S.A.; GIROCLAD, SL; OVIDICROM S.L.; RECTIFICADOS DELVAL S.A; REQUEL S.L.; Talleres Durocrom S. L.; TALLERES GUMILA, S.L. Functional chrome plating of parts with at least one axis of symmetry and simple surface geometry Opinions adopted Details
0280-02 Initial Chromium trioxide 215-607-8 1333-82-0 TECNOCROM INDUSTRIAL, S.A.;ALLION ESPAÑOLA S.A.; CROMADO INDUSTRIAL SARRASIN S.L.; CROMECAL, S.L. ; Talleres Acro, S. L. [name of the applicant in the original application: Talleres Acro, S.A. updated due to a change of corporate name]; DUROKROM, SL; IkanKronitek, S.L.; CROMO DURO ANFER S.A.; GIROCLAD, SL; OVIDICROM S.L.; RECTIFICADOS DELVAL S.A; REQUEL S.L.; Talleres Durocrom S. L.; TALLERES GUMILA, S.L. Functional chrome plating of parts with complex surface geometry and requiring the use of an auxiliary anode Opinions adopted Details
0052-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal Mogul Burscheid GmbH Functional chrome plating of piston rings for automotive engines as applied in the segments light vehicle petrol, light vehicle diesel, middle range diesel and heavy duty Commission decided Details
0050-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Friedberg GmbH Functional chrome plating of piston rings for two-stroke and four-stroke large bore engines as applied in the industrial sectors Construction & Industry, Power Generation, Railway and Maritime. Commission decided Details
0119-01 Initial Chromium trioxide 215-607-8 1333-82-0 ZF Friedrichshafen AG Functional chrome plating of piston rods for automotive and rail applications Commission decided Details
0283-01 Initial Chromium trioxide 215-607-8 1333-82-0 KYB SUSPENSIONS EUROPE, S.A.U.; KYB Manufacturing Czech s.r.o. Functional chrome plating of piston rods for shock absorbers for automotive applications Opinions adopted Details
0051-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Valvetrain GmbH Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. Commission decided Details
0068-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hoogovens Court Roll Surface Technologies V.O.F.
WAVEC GmbH
Trattamento Cilindri Laminazione S.r.l.
Walzen-Service-Center GmbH
NORD CHROME SAS
RHENAROLL SA
Texturing Technology Limited – [Decision discontinued as of 01/01/2021]
NC POLAND Sp.z. o.o.
Functional chrome plating of work rolls used in the steel and aluminium industry. Commission decided Details
0214-01 Initial Chromium trioxide 215-607-8 1333-82-0 Salzgitter Flachstahl GmbH Functional chrome plating using chromium trioxide in closed reactor systems for the establishment of a ‘conventional’ hard chrome coating on working rolls applied in the steel industry for the pre-manufacturing of cold-rolled, high-quality textured sheet metal Commission decided Details
0032-03 Initial Chromium trioxide 215-607-8 1333-82-0
  • Chemservice GmbH in its legal capacity as Only Representative of Brother CISA (Pty) Ltd. [application transferred from: “LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.” due to a notified legal entity change]
  • Atotech Deutschland GmbH & Co. KG [name of co-applicant in the original application: "Atotech Deutschland GmbH” updated due to a notified corporate name change]
  • Boeing Distribution Deutschland GmbH [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Chemical Logistic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from: “Prospere Logistic Baltic OÜ as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan” due to a notified change of Only Representative] [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Türkiye Şişe ve Cam Fabrikaları A.S. [name of applicant in the original application: CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S. updated due to a notified change of corporate name];
  • Polychrome Holding B.V [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to notified changes of Only Representative and legal entity]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional chrome plating with decorative character Opinions adopted Details
0095-03 Initial Chromium trioxide 215-607-8 1333-82-0 REGARTIS s.r.o. in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” [application transferred from: “REACHLaw” in its legal capacity as Only Representative of Joint Stock Company “Novotroitsk Plant of Chromium Compounds” due to a notified legal entity change] Functional chrome plating with decorative character Opinions adopted Details
0270-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAIER S. COOP. MAIER CZ s.r.o.; MAIER CROMOPLASTICA S.p.A Functional chrome plating with decorative character for automotive applications Opinions adopted Details
0131-01 Initial Chromium trioxide 215-607-8 1333-82-0 Schell GmbH & Co. KG Armaturentechnologie Functional chrome plating with decorative character for sanitary applications Commission decided Details
0130-01 Initial Chromium trioxide 215-607-8 1333-82-0 Dornbracht AG & Co. KG [name of applicant in the original application: Aloys F. Dornbracht GmbH & Co.KG updated due to a notified change of corporate name] Functional chrome plating with decorative character for sanitary applications Commission decided Details
0220-02 Initial Chromium trioxide 215-607-8 1333-82-0 SRG Global Ibi, S.L. Functional chrome plating with decorative character for transportation applications. Commission decided Details
0294-01 Initial Chromium trioxide 215-607-8 1333-82-0 Kludi GmbH & Co. KG; Kludi-Armaturen Austria Ges.m.b.H. Functional chrome plating with decorative character of metal and plastic substrates for sanitary applications Opinions adopted Details
0268-01 Initial Chromium trioxide 215-607-8 1333-82-0 Rubinetteria Paffoni S.p.A. Functional chrome plating with decorative character of metal substrates for sanitary applications Opinions adopted Details
0053-01 Initial Chromic acid
231-801-5
236-881-5
13530-68-2
7738-94-5
Robert Bosch GmbH Hard chrome plating for gasoline and diesel injection applications Commission decided Details
0186-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Beckman Coulter Ireland Inc. In-process production use of OPnEO as a washing buffer used in the coating of in vitro diagnostic immunoassay particles. Commission decided Details
0126-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 AVX NI [application transferred from: "AVX Limited" due to a notified legal entity change] Industrial use in the manufacture of ceramic sheets for the production of multi-layer ceramic capacitors. Commission decided Details
0091-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Merck KGaA Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 Commission decided Details
0012-04 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Industrial application of paints on metal surfaces (such as machines vehicles, structures, signs, road furniture, coil coating etc.) Commission decided Details
0012-03 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCL Corporation (NL) B.V. OR2 [application transferred from “DCL Corporation (NL) B.V. OR” due to a notified legal entity change. Name of applicant in the original application: DCC Maastricht B.V. OR updated due to a notified change of corporate name] Industrial application of paints on metal surfaces (such as machines vehicles, structures, signs, road furniture, coil coating etc.) Commission decided Details
0184-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Lilly France S.A.S.; Eli Lilly Italia S.p.A. Industrial formulation (dilution) of a silicone solution containing 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated and its subsequent use as a lubricant in the manufacture of medicinal product delivery devices Commission decided Details
0229-01 Review report Chromium trioxide 215-607-8 1333-82-0 Volta Energy Solutions Hungary Kft Industrial formulation of a chromium trioxide solution below 0.1% w/w concentration for the passivation of copper foil used in the manufacture of Lithium Ion Batteries (LiB) for motorised vehicles Opinions adopted Details
0128-01 Initial Chromium trioxide 215-607-8 1333-82-0 Doosan Electro-Materials
Luxembourg SARL
Volta Energy Solutions Hungary Kft [name of applicant in the original application: Doosan Energy Solution Kft updated due to a notified corporate name change]
Industrial formulation of a chromium trioxide solution below 0.1% w/w concentration for the passivation of copper foil used in the manufacture of Lithium Ion Batteries (LiB) for motorised vehicles Commission decided Details
0360-03 Initial 2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate 239-622-4 15571-58-1 Galata Chemicals GmbH; REAGENS SPA; PMC Vlissingen Netherlands B.V. Industrial manufacture of PVC articles through extrusion, injection, calendering and coating using mixtures containing DOTE as stabilizer Opinion development Details
0054-02 Initial Chromium trioxide 215-607-8 1333-82-0 Linde AMT GmbH [name of the applicant in the original application: Praxair Surface Technologies GmbH updated due to a change of corporate name] Industrial spraying of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment to ensure either a low temperaturecured coating for corrosion protection, or a high temperature corrosion & oxidation resistance with reduction of surface roughness or a high temperature adhesive, for aviation, power generation machinery, Oil and Gas and marine applications. Commission decided Details
0054-01 Initial Chromium trioxide 215-607-8 1333-82-0 Linde AMT GmbH [name of the applicant in the original application: Praxair Surface Technologies GmbH updated due to a change of corporate name] Industrial spraying or brush application of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment, to ensure a high temperature corrosion & oxidation resistance, as well as anti-fouling properties or lubricity at high temperature, for automotive, aviation, power generation machinery, Oil and Gas and marine applications. Commission decided Details
0265-02 Initial Trixylyl phosphate 246-677-8 25155-23-1 EDF S.A. Industrial use as a hydraulic fluid in closed systems to drive and control main steam isolation valves Opinions adopted Details
0265-01 Initial Trixylyl phosphate 246-677-8 25155-23-1 EDF S.A. Industrial use as a hydraulic fluid in closed systems to drive and control the steam inlet valves of turbines Opinions adopted Details
0021-01 Initial Trichloroethylene 201-167-4 79-01-6 Grupa Azoty S.A. Industrial use as a process chemical in caprolactam purification Commission decided Details
0077-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Eli Lilly Kinsale Limited [application transferred from original Applicant: Eli Lilly S.A. - Irish Branch due to a notified legal entity change] Industrial use as a reaction medium and a solvating agent in mediating subsequent chemical transformation reactions leading to the manufacture of an Active Pharmaceutical Ingredient, Raloxifene Hydrochloride Commission decided Details
0060-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 BASF SE Industrial use as a recyclable solvent and extraction agent in a closed system for purification of 1,3,5-trioxane Commission decided Details
0080-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 H&R Ölwerke Schindler GmbH
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Industrial use as a solvent and anti-solvent of the feedstock and intermediate product streams in the combined de-waxing and de-oiling of refining of petroleum vacuum distillates for the production of base oils and hard paraffin waxes Commission decided Details
0078-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2
  • Specialty Electronic Materials Italy srl [name of lead applicant in the original application: DOW ITALIA S.R.L. updated due to a notified legal entity change]
  • DSP S.A.S. [name of co-applicant in the original application: Dow France SAS updated due to a notified legal entity change]
Industrial use as a sulphonation swelling agent of polystyrene-divinylbenzene copolymer beads in the production of strong acid cation exchange resins Commission decided Details
0201-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A.; Aguettant Diagnostics [name of co-applicant in the original application: “Delpharm Biotech” updated due to a notified corporate name change] Industrial use as a surfactant in a lysis buffer for the release of proteins and antigens from biological material used in the manufacture of three SERELISA veterinary In Vitro Diagnostic devices (IVDs) for detecting infectious disease in farm animals. Commission decided Details
0167-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott GmbH [name of applicant in the original application: Abbott GmbH & Co. KG updated due to a notified change of corporate name] Industrial use as a surfactant in the extraction and purification of antigens for incorporation into In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. Commission decided Details
0167-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Ireland
Abbott GmbH [name of applicant in the original application: Abbott GmbH & Co. KG updated due to a notified change of corporate name]
Industrial use as a surfactant in the formulation of In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. Commission decided Details
0167-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Ireland Industrial use as a surfactant in the formulation of system solutions (Pre-Trigger and Trigger), for use with In-Vitro Diagnostic Devices (IVDs) on ARCHITECT and Alinity automated analyser systems. Commission decided Details
0145-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - BioMarin International Limited Industrial use as a surfactant to perform viral inactivation of biological proteins in the manufacture of a biopharmaceutical Final Bulk Drug Substance (FBDS) for an Enzyme Replacement Therapy (BMN250) for the treatment of Mucopolysaccharidosis IIIB (MPS IIIB). Commission decided Details
0145-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - BioMarin International Limited Industrial use as a surfactant to perform viral inactivation of biological proteins in the manufacture of a biopharmaceutical Final Bulk Drug Substance (FBDS) for Gene Therapy products for the treatment of rare conditions in the human population. Commission decided Details
0079-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent and reaction medium during the phthalimidomethylation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of anion exchange and chelating resins Commission decided Details
0120-01 Initial 1,2-dichloroethane (EDC) 203-458-1 107-06-2 Microbeads AS Industrial use as a swelling agent during the sulfonation reaction of crosslinked polystyrene beads in the manufacture of ion exchange resins for purification of radioactive waste Commission decided Details
0079-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins Commission decided Details
0223-01 Review report 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins. Commission decided Details
0201-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A. Industrial use as a viral inactivating agent in the manufacture of two veterinary biologic drugs for treatment of osteoarthritis in cats and dogs Commission decided Details
0243-01 Review report Trichloroethylene 201-167-4 79-01-6 DOMO Caproleuna GmbH Industrial use as an extraction solvent for the purification of caprolactam from caprolactam oil Commission decided Details
0020-01 Initial Trichloroethylene 201-167-4 79-01-6 DOMO Caproleuna GmbH Industrial use as an extraction solvent for the purification of caprolactam from caprolactam oil Commission decided Details
0191-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Sekisui S-lec BV Roermond Industrial use as polymer additive in the manufacture of interlayer polymer films for laminated safety glass Commission decided Details
0024-02 Initial Trichloroethylene 201-167-4 79-01-6 SAFECHEM Europe GmbH [application transferred from original Applicant: "Blue Cube Germany Assets GmbH & Co. KG” due to a notified legal entity change] Industrial use as process chemical (enclosed systems) in Alcantara Material production Commission decided Details
0076-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 BASF plc - [Decision discontinued as of 01/01/2021; application transferred from original Applicant: BASF SE due to a notified legal entity change] Industrial use as solvent and crystallisation medium in the synthesis of the EU biocide flocoumafen (ISO) Discontinued as of 01 January 2021 Details
0076-01 Initial 1,2-dichloroethane (EDC) 203-458-1 107-06-2 BASF SE Industrial use as solvent and crystallisation medium in the synthesis of the EU pesticide bentazone (ISO) Commission decided Details
0201-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Zoetis Belgium S.A.; Aguettant Diagnostics [name of co-applicant in the original application: “Delpharm Biotech” updated due to a notified corporate name change] Industrial use in formulation of kits, kit reagents and buffer solutions in two WITNESS and three SERELISA veterinary In Vitro Diagnostic devices (IVDs) used for detecting certain diseases in pets and farm animals Commission decided Details
0003-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn Details
0002-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 ARKEMA FRANCE Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn Details
0004-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn Details
0083-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives Commission decided Details
0224-01 Review report 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives. Commission decided Details
0082-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Cytiva Sweden AB [name of applicant in the original application: GE Healthcare Bio-Sciences AB updated due to a notified change of corporate name] Industrial use of 1,2-dichloroethane as an emulsifying solvent in the manufacture of porous particles for beaded chromatography and cell culture media. Commission decided Details
0225-01 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for custom-made rollers with high reliability requirements for steel and aluminium sectors. Commission decided Details
0225-02 Initial 4,4'-methylenebis[2-chloroaniline] 202-918-9 101-14-4 Limburgse Urethane Castings NV Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of high-performance polyurethanes specifically for heavy-duty rollers, tensioner pads and spring blocks with high reliability requirements for offshore energy and renewables sectors. Commission decided Details
0246-01 Initial 2,2'-dichloro-4,4'-methylenedianiline (MOCA) 202-918-9 101-14-4 Courbis Synthèse Annovi S.r.l.; Dansk Elastomer A/S; Durlast S.r.l.; Pieffe S.r.l.; Policart S.r.l.; R.B.M. Italia S.r.l.; Tecnocaucho S.A.; Tegea S.r.l.; Optibelt Urethane Belting Ltd.; Productos Salinas S.A.; V.M. SPA Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of hot cast polyurethane products Commission decided Details
0240-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Alexion Pharma International Operations Unlimited Company Industrial use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated for virus inactivation in the manufacture Andexanet alfa for treatment of adult patients treated with a direct factor Xa (FXa) inhibitor when reversal of anticoagulation is needed due to life-threatening or uncontrolled bleeding Commission decided Details
0197-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - MERCK MILLIPORE LIMITED Industrial use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a surface-active ingredient for the production of two types of mixed cellulose ester membranes (lateral flow and microfiltration membranes). Commission decided Details
0230-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Safran Landing Systems; SOCIETE DE TRAITEMENTS ELECTROLYTIQUES NORMALISES S.T.E.N. Industrial use of 4-NPnEO as non-reactive surfactant in the sealing product in sulfuric acid anodization process of aluminium alloy parts of aircraft landing gears Withdrawn Details
0142-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - SEBIA Industrial use of 4-NPnEO for its detergent properties in the production of buffers and reagents in view of ensuring the positioning of specific proteins necessary for the interpretation of gel electrophoresis in vitro diagnostic tests results based on the determination of isoenzymes. Commission decided Details
0180-02 Initial 4-Nonylphenol, branched and linear, ethoxylated - - Bio-Rad Industrial use of 4-NPnEO for its non-ionic detergent properties in view of controlling reactions and chromatography support saturation required in the production of highly specific and sensitive in vitro immunoassays dedicated to the diagnosis of viral (HIV, HCV, Dengue) and parasitic infections Commission decided Details
0204-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Biokit S.A. Industrial use of 4-tert-OPnEO as a detergent in the preparation of reagents for incorporation into latex-based, ELISA and CLIA In-Vitro-Diagnostic kits. Commission decided Details
0183-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGAST Industrial use of 4-tert-OPnEO for its amphiphilic, surfactant and non-haemolytic properties, to create controlled hydrophilic spots on porous hydrophobic membranes (solid form) for in vitro diagnostic kits for blood testing via antigen/antibody reaction in the following product ranges: ABTest Card®, ABD PAD® and M-TRAP® cartridges for the ONYX® system. Commission decided Details
0140-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGNOSTICA STAGO Industrial use of 4-tert-OPnEO for its detergent properties in the process of cell lysing for the production of in-vitro diagnostic reagents (Asserachrom® HPIA, Asserachrom® HPIA–IgG and Asserachrom® PF4 and STA®-Néoplastine® R15 assays). Commission decided Details
0141-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its detergent properties in the production of electrophoresis gels in view of ensuring the positioning of specific proteins necessary for the interpretation of results of gel electrophoresis in vitro diagnostic tests. Commission decided Details
0141-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - SEBIA Industrial use of 4-tert-OPnEO for its detergent properties resulting in cellular lysis and protein interactions rupture and required for the production of reagents involved in the determination of proteins of interest in gel and capillary electrophoresis IVD tests. Commission decided Details
0180-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Bio-Rad Industrial use of 4-tert-OPnEO for its detergent properties used for extraction, viral inactivation and purification of biological material further formulated and /or coated on articles intended for IVD applications Commission decided Details
0143-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its detergent properties, used for the extraction of biological material which is further formulated and intended for clinical and industrial in vitro testing applications. Commission decided Details
0143-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent properties in the formulation of reagents for molecular clinical and industrial in vitro preparative and testing applications. Commission decided Details
0180-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Bio-Rad Industrial use of 4-tert-OPnEO for its non-ionic detergent properties in view of controlling reactions and chromatography support saturation required in the production of highly specific and sensitive in vitro immunoassays dedicated to the diagnosis of viral (HIV, HCV, Dengue) and parasitic infections Commission decided Details
0179-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent properties, consisting in the filling of 4-tert-OPnEO-containing solutions into specific single-use ampoules to be included in clinical and industrial in vitro testing applications as part of the BioFire and BioFire Next Gen FA products. Commission decided Details
0349-01 Review report 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent properties, used for the extraction of biological material which is further formulated and coated on articles intended for clinical and industrial in vitro testing applications Opinion development Details
0180-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Bio-Rad Industrial use of 4-tert-OPnEO for its non-ionic detergent property in the formulation of in vitro reagents dedicated to high-performance microbiological and immunological assays supported on microplates or magnetic particles Commission decided Details
0143-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent to control the level of non-specific reactions in the formulation of in vitro reagents for clinical and industrial in vitro testing immunoassays. Commission decided Details