EU-IN_VITRO_MEDICAL_DEVICES-ART_3_ANX_1

In Vitro Diagnostic Medical Devices Directive - Hazardous Substances

EU. Hazardous Substances for Purposes of Article 3 & Annex I (Essential Requirements), Directive 98/79/EC on In Vitro Diagnostic Medical Devices, 7 December 1998

This list contains a non-exhaustive inventory of hazardous substances for purposes of essential requirements (Article 3 and Annex I) for general safety, design, manufacture and hazard communication of in vitro diagnostic medical devices. It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Note that Regulation 2017/746/EU on in vitro diagnostic medical devices was published in the EU Official Journal on 5 May 2017. With few exceptions specified in Articles 112 and 113 of this Regulation, Directive 98/79/EC is repealed, and the rules pursuant to 2017/746/EU apply, from 26 May 2022.

Last updated 11 listopada 2024. Database contains 4821 unique substances/entries.
Filter the list

A complex combination of hydrocarbons produced by treating a dewaxed light paraffinic distillate with hydrogen in the presence of a catalyst. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C15 through C30.
292-620-5
90640-97-4
Carc. 1B
A complex combination of hydrocarbons resulting from treatment of dewaxed light paraffinic distillate with natural or modified clay in either a contacting or percolation process. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C15 through C30.
292-618-4
90640-96-3
Carc. 1B
A complex combination of hydrocarbons produced by treating dewaxed heavy paraffinic distillate with hydrogen in the presence of a catalyst. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50.
292-617-9
90640-95-2
Carc. 1B
A complex combination of hydrocarbons obtained by treating dewaxed heavy paraffinic distillate with neutral or modified clay in either a contacting or percolation process. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C20 through C50.
292-616-3
90640-94-1
Carc. 1B
A complex combination of hydrocarbons obtained by the subjection of a petroleum fraction to several of the following steps: filtration, centrifugation, atmospheric distillation, vacuum distillation, acidification, neutralization, and clay treatment. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C10 through C20.
292-615-8
90640-93-0
Carc. 1B
A complex combination of hydrocarbons obtained by dewaxing light paraffinic distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C12 through C30 and produces a finished oil with a viscosity of less than 100 SUS at 100°F (19cSt at 40°C). It contains relatively few normal paraffins.
292-614-2
90640-92-9
Carc. 1B
A complex combination of hydrocarbons obtained by dewaxing heavy paraffinic distillate. It consists predominantly of hydrocarbons having carbon numbers predominantely in the range of C20 through C50 and produces a finished oil with a viscosity of equal to or greater than 100 SUS at 100°F (19cST at 40°C). It contains relatively few normal paraffins.
292-613-7
90640-91-8
Carc. 1B
The oil remaining after the removal of phenolic compounds (tar acids) from drained naphthalene oil by an alkali wash. Composed primarily of naphthalene and alkyl naphthalenes.
292-612-1
90640-90-7
Carc. 1B; Muta. 1B
The aqueous extract from naphthalene oil produced by an alkaline wash such as aqueous sodium hydroxide. Composed primarily of the alkali salts of various phenolic compounds.
292-611-6
90640-89-4
Carc. 1B; Muta. 1B
The aqueous extract from carbolic oil produced by an alkaline wash such as aqueous sodium hydroxide. Composed primarily of the alkali salts of various phenolic compounds.
292-610-0
90640-88-3
Carc. 1B; Muta. 1B

Export search results to: