EU-IN_VITRO_MEDICAL_DEVICES-ART_3_ANX_1
EU-IN_VITRO_MEDICAL_DEVICES-ART_3_ANX_1
In Vitro Diagnostic Medical Devices Directive - Hazardous Substances
EU. Hazardous Substances for Purposes of Article 3 & Annex I (Essential Requirements), Directive 98/79/EC on In Vitro Diagnostic Medical Devices, 7 December 1998
This list contains a non-exhaustive inventory of hazardous substances for purposes of essential requirements (Article 3 and Annex I) for general safety, design, manufacture and hazard communication of in vitro diagnostic medical devices. It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Note that Regulation 2017/746/EU on in vitro diagnostic medical devices was published in the EU Official Journal on 5 May 2017. With few exceptions specified in Articles 112 and 113 of this Regulation, Directive 98/79/EC is repealed, and the rules pursuant to 2017/746/EU apply, from 26 May 2022.
Last updated 11 listopada 2024. Database contains 4821 unique substances/entries.
Filter the list
|
300-298-5
|
93925-00-9
|
yes |
|||
|
300-257-1
|
93924-61-9
|
Carc. 1B |
|||
|
A distillate obtained from the redistillation of a complex combination of hydrocarbons obtained by the distillation of the effluents from a severe catalytic hydrotreatment of paraffins. It boils in the range of approximately 190°C to 330°C (374°F to 594°F).
|
300-227-8
|
93924-33-5
|
Carc. 1B |
||
|
A complex combination of hydrocarbons obtained by treatment of Foot's oil with natural or modified clay in either a contacting or percolation process to remove the trace amounts of polar compounds and impurities present. It consists predominantly of branched chain hydrocarbons with carbon numbers predominantly in the range of C20 through C50.
|
300-226-2
|
93924-32-4
|
Flam. Gas 1; Press. Gas; Carc. 1B |
||
|
A complex combination of hydrocarbons obtained by treatment of Foot's oil with sulfuric acid. It consists predominantly of branched-chain hydrocarbons with carbon numbers predominantly in the range of C20 through C50.
|
300-225-7
|
93924-31-3
|
Flam. Gas 1; Press. Gas; Carc. 1B |
||
|
300-094-6
|
93920-10-6
|
Carc. 1A; Muta. 2; Repr. 1B; STOT RE 1; Resp. Sens. 1; Skin Sens. 1 |
|||
|
300-093-0
|
93920-09-3
|
Carc. 1A; Muta. 2; Repr. 1B; STOT RE 1; Resp. Sens. 1; Skin Sens. 1 |
|||
|
A complex combination of hydrocarbons, sulfur compounds and metal-containing organic compounds obtained as the residue from refinery fractionation cracking processes. It produces a finished oil with a viscosity above 2cSt. at 100°C.
|
298-754-0
|
93821-66-0
|
Carc. 1B |
||
|
An acid sludge by-product of the sulphuric acid refining of crude high temperature coal. Composed primarily of sulfuric acid and organic compounds.
|
298-725-2
|
93821-38-6
|
Carc. 1B; Muta. 1B |
||
|
A complex combination of hydrocarbons obtained as residue from the distillation of steam cracked heat soaked naphtha and boiling in the range of approximately 150°C to 350°C (302°F to 662°F).
|
297-905-8
|
93763-85-0
|
Carc. 1B |
||