EU-IN_VITRO_MEDICAL_DEVICES-ART_3_ANX_1

In Vitro Diagnostic Medical Devices Directive - Hazardous Substances

EU. Hazardous Substances for Purposes of Article 3 & Annex I (Essential Requirements), Directive 98/79/EC on In Vitro Diagnostic Medical Devices, 7 December 1998

This list contains a non-exhaustive inventory of hazardous substances for purposes of essential requirements (Article 3 and Annex I) for general safety, design, manufacture and hazard communication of in vitro diagnostic medical devices. It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list). Note that Regulation 2017/746/EU on in vitro diagnostic medical devices was published in the EU Official Journal on 5 May 2017. With few exceptions specified in Articles 112 and 113 of this Regulation, Directive 98/79/EC is repealed, and the rules pursuant to 2017/746/EU apply, from 26 May 2022.

Last updated 17 srpnja 2024. Database contains 4821 unique substances/entries.
Filter the list

PAMPLEFLEUR
402-770-7
92585-24-5
Skin Sens. 1
DIDA
402-360-8
92511-22-3
Eye Dam. 1
BENZTRIAZOL UV ABSORBER BUK 4499; BUK 4499; UV ABSORBER BUK 4499
403-080-9
92484-48-5
Eye Dam. 1
213-104-8
924-43-6
Flam. Liq. 2; Acute Tox. 4
213-103-2
924-42-5
Carc. 1B; Muta. 1B; STOT RE 1
213-090-3
923-26-2
Eye Irrit. 2; Skin Sens. 1
A complex combination of hydrocarbons obtained by the fractionation of steam cracked naphtha after recovery from a heat soaking process. It consists predominantly of hydrocarbons having a carbon number predominantly in the range of C4 through C6 and boiling in the range of approximately 0°C to 80°C (32°F to 176°F).
296-028-8
92201-97-3
Carc. 1B; Muta. 1B; Asp. Tox. 1
A complex combination of hydrocarbons produced by the distillation of products from a catalytic cracking process which has been used as a heat transfer fluid. It consists predominantly of hydrocarbons boiling in the range of approximately 190°C to 340°C (374°F to 644°F). This stream is likely to contain organic sulfur compounds.
295-991-1
92201-60-0
Carc. 1B
A complex combination of hydrocarbons produced by the distillation of products from a catalytic cracking process which has been used as a heat transfer fluid. It consists predominantly of hydrocarbons boiling in the range of approximately 220°C to 450°C (428°F to 842°F). This stream is likely to contain organic sulfur compounds.
295-990-6
92201-59-7
Carc. 1B
Product obtained from recycling of the end electrolyte of copper refining electrolysis followed by evaporation to separate the residual sulfuric acid. Consists primarily of nickel and iron sulfates with small amounts of the sulfates of zinc, alkali earths and alkali metals.
295-859-3
92129-57-2
Carc. 1A; Muta. 2; Repr. 1B; STOT RE 1; Acute Tox. 4; Skin Irrit. 2; Resp. Sens. 1; Skin Sens. 1

Export search results to: