Popis EZ-a

Popis EZ-a

Nested Applications

Popis EZ-a

The EC inventory published below is a copy as received from the JRC in 2008 on the founding of ECHA. It is comprised of the following lists:

  • EINECS (European INventory of Existing Commercial chemical Substances) as published in O.J. C 146A, 15.6.1990. EINECS is an inventory of substances that were deemed to be on the European Community market between 1 January 1971 and 18 September 1981. EINECS was drawn up by the European Commission in the application of Article 13 of Directive 67/548/EEC, as amended by Directive 79/831/EEC, and in accordance with the detailed provisions of Commission Decision 81/437/EEC. Substances listed in EINECS are considered phase-in substances under the REACH Regulation.
  • ELINCS (European LIst of Notified Chemical Substances) in support of Directive 92/32/EEC, the 7th amendment to Directive 67/548/EEC. ELINCS lists those substances which were notified under Directive 67/548/EEC, the Dangerous Substances Directive Notification of New Substances (NONS) that became commercially available after 18 September 1981.
  • NLP (No-Longer Polymers).  The definition of polymers was changed in April 1992 by Council Directive 92/32/EEC amending Directive 67/548/EEC, with the result that substances previously considered to be polymers were no longer excluded from regulation. Thus the No-longer Polymers (NLP) list was drawn up, consisting of such substances that were commercially available between 18 September 1981 and 31 October 1993.
Database contains 106212 unique substances/entries.
Filter the list

The List does not contain any Substances.
 
The product obtained from the purification of waste waters from production and gas purification processes during non-ferrous metal production. Composed primarily of gypsum.
310-066-5
102110-64-5
The product obtained from the purification of waste waters from production and gas purification processes during non-ferrous metal production. Composed primarily of gypsum.
Details
The product obtained during production of castings with lost molds and cores. Composed primarily of quartz sand or chromium, olivine or zirconium ore sand that contains clay, coal dust constituents, synthetic resins and reaction products formed by thermal effects.
310-071-2
102110-69-0
The product obtained during production of castings with lost molds and cores. Composed primarily of quartz sand or chromium, olivine or zirconium ore sand that contains clay, coal dust constituents, synthetic resins and reaction products formed by thermal effects.
Details
The product obtained by treatment of coal tar oil alkaline extract with CO2 and CaO. Composed primarily of CaCO3, Ca(OH)2, Na2CO3 and other organic and inorganic impurities.
292-629-4
90641-06-8
The product obtained by treatment of coal tar oil alkaline extract with CO2 and CaO. Composed primarily of CaCO3, Ca(OH)2, Na2CO3 and other organic and inorganic impurities.
Details
The product obtained by treating cellulose with caustic soda, reacting this with carbon disulfide, dissolving this in a dilute alkali solution and extruding into an acid to form a continuous viscose tube.
270-493-7
68442-85-3
The product obtained by treating cellulose with caustic soda, reacting this with carbon disulfide, dissolving this in a dilute alkali solution and extruding into an acid to form a continuous viscose tube.
Details
The product obtained by the purification of copper-lead ore concentrate roasting offgas. Composed primarily of arsenic oxide (As2O3).
310-063-9
102110-62-3
The product obtained by the purification of copper-lead ore concentrate roasting offgas. Composed primarily of arsenic oxide (As2O3).
Details
The product obtained by the purification of copper ore concentrate roasting offgas. Composed primarily of lead, mercury and selenium.
310-062-3
102110-61-2
The product obtained by the purification of copper ore concentrate roasting offgas. Composed primarily of lead, mercury and selenium.
Details
The product obtained by oxidation of petroleum pitch in air at temperatures in the range of approximately 200°C to 300°C (392°F to 572°F).
307-353-2
97593-48-1
The product obtained by oxidation of petroleum pitch in air at temperatures in the range of approximately 200°C to 300°C (392°F to 572°F).
Details
The product obtained by filtration of coal mineral matter and undissolved coal from coal extract solution produced by digesting coal in a liquid solvent. A black, viscous, highly complex liquid combination composed primarily of aromatic and partly hydrogenated aromatic hydrocarbons, aromatic nitrogen compounds, aromatic sulfur compounds, phenolic and other aromatic oxygen compounds and their alkyl derivatives.
302-682-8
94114-47-3
The product obtained by filtration of coal mineral matter and undissolved coal from coal extract solution produced by digesting coal in a liquid solvent. A black, viscous, highly complex liquid combination composed primarily of aromatic and partly hydrogenated aromatic hydrocarbons, aromatic nitrogen compounds, aromatic sulfur compounds, phenolic and other aromatic oxygen compounds and their alkyl derivatives.
Details
The product obtained by air-blowing, at elevated temperature, low-temperature coal tar pitch. It has a softening-point within the approximate range of 70°C to 180°C (158°F to 356°F). Composed primarily of a complex mixture of hydrocarbons.
292-654-0
90669-59-3
The product obtained by air-blowing, at elevated temperature, low-temperature coal tar pitch. It has a softening-point within the approximate range of 70°C to 180°C (158°F to 356°F). Composed primarily of a complex mixture of hydrocarbons.
Details
The product obtained by acid leaching of copper speiss. Composed primarily of antimony, arsenic and lead with high precious metal content.
309-643-4
100656-54-0
The product obtained by acid leaching of copper speiss. Composed primarily of antimony, arsenic and lead with high precious metal content.
Details
The product obtained after alcoholic precipitation and treatment according to Cohn of the supernatant liquid obtained after sedimentation and centrifugation of bovine blood.
292-322-5
90604-29-8
The product obtained after alcoholic precipitation and treatment according to Cohn of the supernatant liquid obtained after sedimentation and centrifugation of bovine blood.
Details
The product formed by heating crushed and screened shale in a rotary kiln to a plastic state, cooling, crushing, and screening into the proper sized units. It contains, but is not limited to aluminium, calcium, iron, magnesium, oxygen, potassium, silicon, sodium, and sulfur.
269-827-4
68334-37-2
The product formed by heating crushed and screened shale in a rotary kiln to a plastic state, cooling, crushing, and screening into the proper sized units. It contains, but is not limited to aluminium, calcium, iron, magnesium, oxygen, potassium, silicon, sodium, and sulfur.
Details
The pregnant solution obtained when sulfuric acid is applied to copper oxide ores and the copper and other metals taken into solution.
266-963-6
67711-87-9
The pregnant solution obtained when sulfuric acid is applied to copper oxide ores and the copper and other metals taken into solution.
Details
The phenolic oil produced by the distillation of coal tar is distilled after dephenolation and debasing to obtain the indene fraction. This boils in the approximate range of 160°C to 190°C (320°F to 374°F). Contains primarily mesitylene, pseudocumene, coumarone, xylenes, hydrindene, and indene.
310-248-4
140362-58-9
The phenolic oil produced by the distillation of coal tar is distilled after dephenolation and debasing to obtain the indene fraction. This boils in the approximate range of 160°C to 190°C (320°F to 374°F). Contains primarily mesitylene, pseudocumene, coumarone, xylenes, hydrindene, and indene.
Details
The oxidized surface of steel produced during reheating, conditioning, hot rolling, and hot forming operations. This substance is usually removed by process waters used for descaling, roll and material cooling, and other purposes. It is subsequently recovered by gravity separation techniques. Composed primarily of high-purity iron oxides. May contain varying amounts of other oxides, elements, and trace compounds.
266-007-8
65996-74-9
The oxidized surface of steel produced during reheating, conditioning, hot rolling, and hot forming operations. This substance is usually removed by process waters used for descaling, roll and material cooling, and other purposes. It is subsequently recovered by gravity separation techniques. Composed primarily of high-purity iron oxides. May contain varying amounts of other oxides, elements, and trace compounds.
Details
The overhead middle cut from fractionation boiling in a range of approximately 446°C to 482°C (835°F to 900°F).
271-071-5
68515-29-7
The overhead middle cut from fractionation boiling in a range of approximately 446°C to 482°C (835°F to 900°F).
Details
The overhead light ends from fractionation boiling approximately below 446°C (835°F).
271-069-4
68515-28-6
The overhead light ends from fractionation boiling approximately below 446°C (835°F).
Details
The oil resulting from the alkali washing of carbolic oil from high temperature coal tar to remove phenolic compounds (tar acids). Composed primarily of indene, indan, and alkyl benzenes.
310-258-9
140362-67-0
The oil resulting from the alkali washing of carbolic oil from high temperature coal tar to remove phenolic compounds (tar acids). Composed primarily of indene, indan, and alkyl benzenes.
Details
The oil resulting from the acid washing of alkali-washed carbolic oil to remove the minor amounts of basic compounds (tar bases). Composed primarily of indene, indan and alkylbenzenes.
292-624-7
90641-01-3
The oil resulting from the acid washing of alkali-washed carbolic oil to remove the minor amounts of basic compounds (tar bases). Composed primarily of indene, indan and alkylbenzenes.
Details
The oil remaining after the removal, by a crystallization process, of an anthracene-rich solid (anthracene paste) from anthracene oil. It is composed primarily of two, three and four membered aromatic compounds.
292-604-8
90640-82-7
The oil remaining after the removal, by a crystallization process, of an anthracene-rich solid (anthracene paste) from anthracene oil. It is composed primarily of two, three and four membered aromatic compounds.
Details
The oil remaining after the removal of phenolic compounds (tar acids) from drained naphthalene oil by an alkali wash. Composed primarily of naphthalene and alkyl naphthalenes.
292-612-1
90640-90-7
The oil remaining after the removal of phenolic compounds (tar acids) from drained naphthalene oil by an alkali wash. Composed primarily of naphthalene and alkyl naphthalenes.
Details
The oil remaining after the removal by a crystallization process of acenaphthene from acenaphthene oil from high temperature coal tar. Composed primarily of naphthene and alkyl naphthenes.
310-299-2
185323-41-5
The oil remaining after the removal by a crystallization process of acenaphthene from acenaphthene oil from high temperature coal tar. Composed primarily of naphthene and alkyl naphthenes.
Details
The oil remaining after removal by a crystallization process of most acenaphthene from acenaphthene oil from coal tar. Composed primarily of naphthalene and alkylnaphthalenes.
310-223-8
140203-14-1
The oil remaining after removal by a crystallization process of most acenaphthene from acenaphthene oil from coal tar. Composed primarily of naphthalene and alkylnaphthalenes.
Details
The oil remaining after removal by a crystallization process of acenaphthene from acenaphthene oil from coal tar. Composed primarily of naphthalene and alkylnaphthalenes.
292-606-9
90640-85-0
The oil remaining after removal by a crystallization process of acenaphthene from acenaphthene oil from coal tar. Composed primarily of naphthalene and alkylnaphthalenes.
Details
The oil obtained from the pyrolysis of textile wastes from a polyamide/polyester fiber mixture at 600°C to 800°C (1112°F to 1472°F). It consists predominantly of benzene and naphthalene and their homologs, benzonitrile and other di- and polynuclear aromatic hydrocarbons.
309-762-1
100801-78-3
The oil obtained from the pyrolysis of textile wastes from a polyamide/polyester fiber mixture at 600°C to 800°C (1112°F to 1472°F). It consists predominantly of benzene and naphthalene and their homologs, benzonitrile and other di- and polynuclear aromatic hydrocarbons.
Details

Export search results to: