Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

General advice: Remove soiled or soaked clothing immediately

After inhalation: Ensure supply of fresh air. In the event of symptoms take medical treatment.

After contact with skin: In case of contact with skin wash off immediately with plenty of water. Consult a doctor if skin irritation persists.

After contact with eyes: In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice

After ingestion: Call for medical advice immediately; show the container or the label.

The most important acute and delayed symptoms and effects

Symptoms: Eye irritation, Skin irritation

Fire-fighting measures

Suitable extinguishing media: foam, carbon dioxide, dry powder, water spray.

Extinguishing media which shall not be used for safety reasons: Full water jet

Special hazards arising from the substance or mixture: In the event of fire the following can be released:

- carbon dioxide, carbon monoxide

- Tin oxide

Under certain conditions of combustion traces of other toxic substances cannot be excluded

Advice for fire-fighters : Do not inhale explosion and/or combustion gases

Use self-contained breathing apparatus and wear protective suit.

Further information : Collect contaminated firefighting water separately, must not be discharged into the drains.

Accidental release measures

Personal precautions, protective equipment and emergency procedures: Use personal protective equipment.

Environmental precautions: Do not allow to enter drains or waterways.

Do not discharge into the subsoil/soil.

Methods and material for containment and cleaning up: Take up with absorbent material (eg sand, kieselguhr,universal binder)

Dispose of absorbed material in accordance with the regulations.

Handling and storage

Precautions for safe handling

Advice on safe handling: Provide good ventilation of working area (local exhaust ventilation if necessary.

General protectivemeasures: Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols.

Hygiene measures: Wash hands before breaks and after work. Remove soiled or soaked clothing immediately.

Do not eat, drink or smoke when working. Use barrier skin cream.

                                 

Conditions for safe storage, including any incompatibilities

Advice on protection against fire and explosion : No special measures required.

Further information: Keep container tightly closed and dry in a well-ventilated place.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Personal protection equipment

General protective measures : Avoid contact with eyes

Do not inhale gases/vapours/aerosols.

Hygiene measures : At work do not eat, drink, smoke or take drugs.

Wash hands before breaks and after work.

Remove soiled or soaked clothing immediately.

Respiratory protection : in case of formation of vapours/aerosols:

Short term: filter apparatus, combination filter A-P2

Hand protection : Examples of suitable gloves are those made by the company Kächele-Cama Latex GmbH, Am Kreuzacker 9, D-36124 Eichenzell, e-mail vertrieb@kcl.de, with subsequent specification (test according to EN374); specific workplace conditions must be separately taken into account.

gloves made of natural latex

Minimum break-through time of the glove: > 480 min

Glove strength: 1 mm

gloves made of natural latex

Minimum break-through time of the glove: > 480 min

Glove strength: 0,5 mm

gloves made of chloroprene (CR, e.g. Neoprene)

Minimum break-through time of the glove: > 480 min

Glove strength: 0,6 mm

gloves made of nitril (NBR)

Minimum break-through time of the glove: > 480 min

Glove strength: 0,4 mm

gloves made of nitril (NBR)

Minimum break-through time of the glove: > 480 min

Glove strength: 0,1 mm

protective gloves made of fluorinated rubber (FKM, e.g. Viton)

Minimum break-through time of the glove: > 480 min

Glove strength: 0,7 mm

gloves made of butyl

Minimum break-through time of the glove: > 480 min

Glove strength: 0,3 mm

Eye protection : goggles with side pieces

Skin and body protection : light protective clothing

Stability and reactivity

Reactivity: see section "Possibility of hazardous reactions"

Chemical stability: The product is stable under normal conditions.

Possibility of hazardous reactions: No hazardous reactions with proper storage and handling.

Conditions to avoid: Unknown

Incompatible materials: Unknown

Hazardous decomposition products: None with proper storage and handling.

Disposal considerations

Product: In accordance with local authority regulations, take to special waste incineration plant

Contaminated packaging: If empty contaminated containers are recycled or disposed of, the receiver must be informed about possible hazards.