Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Skin contact:

Wash skin immediately with plenty of water.

Remove contaminated clothing. If irritation persists after washing, consult a doctor.

Eye Contact

Flush eyes immediately with plenty of water for at least 10 minutes, keeping open eyelids. Consult a doctor promptly.

Inhalation

Separate casualty from the danger zone. Place the affected in the most comfortable position and protéjasele cold. If breathing is labored or patient is cyanotic, give oxygen through a facemask. Seek immediate medical attention.

Ingestion

If the affected person is conscious, give two glasses of water or milk and cause vomiting. Then orally administered 6 tablets effervescent calcium dissolved in water. Consult a doctor immediately.

Caution: Ingestion of small amounts can cause sudden and severe hypocalcemia. in If poisoning or accident, call a Service Emergency Hospital.

Fire-fighting measures

The product is not combustible or oxidizing. No restriction in case of fire in the nearby.

Transfer the containers to a safe area, provided that such operation is safe.

Provide respiratory protection and protective clothing when extinguising a fire.

Accidental release measures

Collect as much product as possible for the cycle productive. Prevent contamination of soil, water and drains.

Mechanically collect  preventing the formation of powder. Introduce in appropriately marked, clean, dry and closable recipients. Evacuate containers from spill area. Then wash the area thoroughly with water.

Handling and storage

Avoid inhalation, absorption and contact with the product. Handle containers carefully, preventing spills and dust. Seek ventilation. Containers which have been partially used must remain hermetically closed after use and be returned to the warehouse. Empty containers may contain waste, and must therefore be handled as if  full.

Storage should be located in a dry and well-ventilated zone, adapted for toxic products away from heat source and incompatible products. Store in original recipient. Do not store in the proximity of products intended for human or animal. In Spain, the storage must comply with the R.D. 379/2001 (Regulation storage chemicals) when stored above 250 Kg.

As packaging materials can be used laminated paper packaging, plastic bags, plasticized cardboard drums, plastic drums, Plastics IBCs.  

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
2853
Shippingopen allclose all
Labels:
6.1
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
2850
Shippingopen allclose all
Labels:
6.1
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
2853
Shippingopen allclose all
Labels:
6.1
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
2853
Shippingopen allclose all
Labels:
6.1
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

VLA – ED: 2,5 mg. (F) / m3

Local exhaust is recommended to keep dust emissions below the lowest level permissible exposure. Regular checks of the medium

work environment.

Eye Protection

Do not wear contact lenses while using the substance. Use chemical protection gogles .

Skin protection

Wear protective long-slives clothes and neoprene or rubber boots. In emergency cases, wear an impermeable to particles clothes (IPE category 3 type 5). Wear neoprene or rubber gloves.

Respiratory protection

All EPIs shall be category 3, possibly type FFP3 masks filter,  P3 type half mask filters, full mask type P3 filter, assisted ventilation with helmet or hood type THP3, assisted ventilation with full mask type TMP3.

Stability and reactivity

The reaction with strong mineral acids produces HF.

The product should be kept dry.

Disposal considerations

Product

Deliver the product packaging, in dry  and closed containers to an authorized agent  to manage disposal, which probably made by a subsequent chemical and physical treatment deposit in a landfill.

Recipient

Before  destruction or deposit, containers must be dusted with caution.

Once cleaned, recipients can be eliminated in a duly authorized landfill, or  by combustion in a legally authorized plant.

Non contaminated packaging must be treated as inert waste or recyclable material.