Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 208-395-3 | CAS number: 526-75-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Biodegradation in water: screening tests
Administrative data
Link to relevant study record(s)
- Endpoint:
- biodegradation in water: ready biodegradability
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- data from handbook or collection of data
- Justification for type of information:
- Data is from peer reviewed journal
- Qualifier:
- according to guideline
- Guideline:
- other: as mentioned below
- Principles of method if other than guideline:
- Biodegradation study was conducted for evaluating the percentage biodegradability of test chemical.
- GLP compliance:
- not specified
- Oxygen conditions:
- aerobic
- Inoculum or test system:
- activated sludge (adaptation not specified)
- Details on inoculum:
- No data available.
- Duration of test (contact time):
- 4 d
- Initial conc.:
- 0.016 mg/L
- Based on:
- test mat.
- Parameter followed for biodegradation estimation:
- other: % removal
- Details on study design:
- TEST CONDITIONS
- pH: 8.0 - Key result
- Parameter:
- other: % removal
- Value:
- 99.98
- Sampling time:
- 4 d
- Remarks on result:
- other: Other details not known
- Details on results:
- The percentage degradation of test chemical was determined to be 99.98% in 4 days.
- Validity criteria fulfilled:
- not specified
- Interpretation of results:
- readily biodegradable
- Conclusions:
- The percentage degradation of test substance was determined to be 99.98% in 4 days. Thus, based on percentage degradation, test chemical was considered to be readily biodegradable in water.
- Executive summary:
Biodegradation study was conducted for evaluating the percentage biodegradability of test chemical under aerobic conditions. Activated sludge was used as a test inoculum. The organic analyses in the study were performed by gas chromatography / mass spectrometry (GC/MS) on methylene chloride extracts of the wastewater samples. Three extracts were collected--a neutral extract, an acid extract, and a base extract. Water samples extracted and analyzed included the raw wastewater after dissolved air flotation (DAF) treatment, effluent from activated sludge (AS) treatment, and effluent from activated carbon (AC) columns.The percentage degradation of test substance was determined to be 99.98% in 4 days. Thus, based on percentage degradation, test chemical was considered to be readily biodegradable in nature.
Reference
Description of key information
Biodegradation in water:
Biodegradation study was conducted for 28-days following the OECD guideline 301 D for determining the ready biodegradability of the test chemical. The study was performed at a temperature of 20°C under aerobic conditions. Aerobic conditions was provided by means of mineral media which is aerated for 20 hours prior to start of the experiment. The test system included control, test chemical, toxicity control and referencesubstance. Polyseed capsule (mixed culture) was used as a test inoculum for the study. Test inoculum polyseed capsule was composed of blend of specialized microbial cultures and food grade gelatin made by International Laboratory Supply (InterLab), LTD. No pretreatment / preconditioning was given to the test inoculum as the polyseed capsule requires only one hour of stirring to activate it. Polyseed capsule is a blend of broad spectrum bacteria designed specifically as seed inoculums for the BOD test. Polyseed is an EPA approved BOD seed inoculum. 38.4 mg of polyseed from the capsule was weighed and added in 100 mL mineral media water and then stirred for 1 h. This gave the bacterial count as 104to 106CFU/L. A further concentration of 1 mL/L of polyseed solution is prepared and from this working inoculum 0.125 mL solution is added to every bottles of 125 mL.The concentration of test and reference substance (Sodium Benzoate) chosen for both the study was 4 mg/L. OECD mineral medium was used for the study. ThOD (Theoretical oxygen demand) of test and reference chemical was determined by calculation. % degradation was calculated using the values of BOD and ThOD for test chemical and reference substance. The % degradation of procedure control (reference substance) was also calculated using BOD & ThOD and was determined to be 100 %. Degradation of Sodium Benzoate exceeds 68.86 % on 7 days & 77.84 % on 14th day. The activity of the inoculum is thus verified and the test can be considered as valid.The BOD28 value of test chemical was observed to be 1.75 mgO2/mg. ThOD was calculated as 2.62 mgO2/mg. Accordingly, the % degradation of the test chemical after 28 days of incubation at 20 ± 1°C according to Closed Bottle test was determined to be 66.79 %. Based on the results, the test chemical under the test conditions, was considered to be readily biodegradable in nature
Key value for chemical safety assessment
- Biodegradation in water:
- readily biodegradable
Additional information
Various experimental studies of the target chemical were reviewed for biodegradation endpoint which are summarized as below:
Biodegradation in water:
Biodegradation study was conducted for 28-days following the OECD guideline 301 D for determining the ready biodegradability of the test chemical. The study was performed at a temperature of 20°C under aerobic conditions. Aerobic conditions was provided by means of mineral media which is aerated for 20 hours prior to start of the experiment. The test system included control, test chemical, toxicity control and referencesubstance. Polyseed capsule (mixed culture) was used as a test inoculum for the study. Test inoculum polyseed capsule was composed of blend of specialized microbial cultures and food grade gelatin made by International Laboratory Supply (InterLab), LTD. No pretreatment / preconditioning was given to the test inoculum as the polyseed capsule requires only one hour of stirring to activate it. Polyseed capsule is a blend of broad spectrum bacteria designed specifically as seed inoculums for the BOD test. Polyseed is an EPA approved BOD seed inoculum. 38.4 mg of polyseed from the capsule was weighed and added in 100 mL mineral media water and then stirred for 1 h. This gave the bacterial count as 104to 106CFU/L. A further concentration of 1 mL/L of polyseed solution is prepared and from this working inoculum 0.125 mL solution is added to every bottles of 125 mL.The concentration of test and reference substance (Sodium Benzoate) chosen for both the study was 4 mg/L. OECD mineral medium was used for the study. ThOD (Theoretical oxygen demand) of test and reference chemical was determined by calculation. % degradation was calculated using the values of BOD and ThOD for test chemical and reference substance. The % degradation of procedure control (reference substance) was also calculated using BOD & ThOD and was determined to be 100 %. Degradation of Sodium Benzoate exceeds 68.86 % on 7 days & 77.84 % on 14th day. The activity of the inoculum is thus verified and the test can be considered as valid.The BOD28 value of test chemical was observed to be 1.75 mgO2/mg. ThOD was calculated as 2.62 mgO2/mg. Accordingly, the % degradation of the test chemical after 28 days of incubation at 20 ± 1°C according to Closed Bottle test was determined to be 66.79 %. Based on the results, the test chemical under the test conditions, was considered to be readily biodegradable in nature
In an experimental study from peer reviewed journal (E. H. Snider and F. S. Manning, 1982), biodegradation experiment was conducted for evaluating the percentage biodegradability of test chemical under aerobic conditions. Activated sludge was used as a test inoculum. The organic analyses in the study were performed by gas chromatography / mass spectrometry (GC/MS) on methylene chloride extracts of the wastewater samples. Three extracts were collected--a neutral extract, an acid extract, and a base extract. Water samples extracted and analyzed included the raw wastewater after dissolved air flotation (DAF) treatment, effluent from activated sludge (AS) treatment, and effluent from activated carbon (AC) columns. The percentage degradation of test substance was determined to be 99.98% in 4 days. Thus, based on percentage degradation, test chemical was considered to be readily biodegradable in nature.
In a supporting weight of evidence study, a batch test in an open system was conducted for 5 days (120 hr) for evaluating the biodegradability of test chemical (from peer reviewed journal, authoritative database and secondary source). Adapted activated sludge was used as a test inoculum obtained from a sewage plant is cultivated in a1000ml volumetric cylinder. The mixture is aerated with pressure air. Every day 200 ml of the mixture is driven off so that the sludge age is 5 days. After driving off the 200ml of the mixture aeration is interrupted, and after sedimentationca.600mlof the liquid phase is driven off. The residue (200 ml of the thickened activated sludge) is diluted with tap water to the volume ofca.800 ml and 600 mg/l of starch or glucose, 600 mg/l of peptone, 25 ml of a phosphate buffer pH 7.2, and the solution of the tested compound are added. Then the mixture in the cylinder is made up to 1000ml with tap water and aerated for 23 h (the recirculation ratio is 0-25). After this period the procedure is repeated. Test chemical conc. used for the study was 200 mg/l based on COD. To 1000-1500ml of the biological medium such amount of the solution of the substance tested is added that the initial COD is 200 mg/l. Then such an amount of the adapted activated sludge, washed and thickened by sedimentation, is dosed to the medium that the concentration of the dry matter is 100 mg/l. Simultaneously, a blank test is prepared. The beaker is placed in a dark room with a roughly 3 constant temperature of 20±3°C on an electromagnetic stirrer and a pH of 7.2 for 120 hrs. The initial value of COD or organic carbon of the liquid phase are determined. Samples filtered or centrifuged before analysis, are taken at suitable intervals. The decrease of the tested substance in the liquid phase is evaluated by determining COD or organic carbon. The results are compared with those of a blank test and standard compound decomposition. With the degree of degradation also the average specific rate of degradation is determined, expressed in terms of mg COD (or organic carbon) removed by a gram of dry matter of the activated sludge per hour. The percentage degradation of test chemical was determined to be 95.5% by using COD removal parameter in 5 days. Thus, based on percentage degradation, test chemical was considered to be readily biodegradable in nature.
Another biodegradation study (JAMES G. MUELLER et. al., 1991) was carried out for 14 days for evaluating the percentage biodegradability of test chemical. Micro-organism was used as a test inoculum isolated from surface soil which was freshly obtained from the American Creosote Works site. Microbial inoculum was prepared by mixing 25 g of creosote-contaminated surface soil (17) freshly obtained from the American Creosote Works site with 100 ml of 2.5 mM phosphate buffer (pH 7). After being mixed well, the suspension was centrifuged (2,500 rpm, 10 min) to remove larger soil particles. The resultant supernatant was decanted and used as a source of indigenous, "creosote-adapted" microorganisms for the ground water medium (GWM).Ground water medium (GWM) was used for the study. For the biodegradation study, approximately 400 liters of groundwater contaminated with creosote and PCP was recovered from an on-site sampling well. Groundwater was removed from a depth of 7 m through Teflon-coated Bev-a-line tubing (15 mm inner diameter) by means of an electric pump. Groundwater was delivered directly into two freshly rinsed, 208-liter steel drums (DOT-17E) and stored on site for ancillary testing. Five subsamples (1.0 liter) were collected in clean, sterile, 1.0-liter Wheaton bottles fitted with Teflon-lined screw caps and stored on ice for transport to the laboratory. Upon arrival at the laboratory, subsamples were stored in darkness at 2°C for subsequent biodegradation studies, toxicity and teratogenicity testing, and chemical analyses. It contains 2.5 ml of filtered groundwater (passed through a plug of silanized glass wool to remove undissolved solids) plus 12.5 ml of modified Bushnell-Haas medium. Additionally, two clean, sterile, 1.0-liter Wheaton bottles fitted with Teflon-lined screw caps received 200 ml of the same medium.Ground water contains the test chemical2,3,5-trimethylphenol. Wheaton bottles consist of 200 ml of ground water medium (which contain ground water and modified Bushnell-Haas medium. Duplicate 25 ml samples were immediately extracted for time zero analysis. Flasks were incubated at 30°C with shaking (200 rpm) in the dark for 14 days. Killed-cell controls were prepared for each sampling time point by adding 2.5 ml of a 37% formaldehyde solution to five of the shake flasks containing 25 ml of GWM. After 1, 3, 5, 8, and 14 days of incubation, the entire contents of two active flasks and one killed-cell control flask were separately extracted and analyzed by GC for the presence of creosote constituents. These data were compared with those obtained from untreated (non-inoculated) GWM that had been stored at 2°C during the 14-day incubation period. As the limit of detection of test chemical by GC is very low during a period 14 days, test chemical was considered to be readily biodegradable in water.
For the test chemical, preliminary biodegradability screening test was conducted for 20 days for evaluating the percentage biodegradability of test chemical (1978). Domestic sewage was used as a test inoculum was obtained from the Chapel Hill sewage treatment plant. The test compound were added to duplicate, acid-washed, 300 ml BOD bottles at concentration of approximately 5 mg/l. Dilution water was prepared from water which had been passed through activated carbon and ion exchange columns and then glass-distilled. Standard nutrients were added to the water as was 0.5 mg/l allylthiourea for control of nitrification. The dilution water was seeded with 1.5 mg/l of domestic sewage. The BOD bottles were filled, stoppered, and incubated in the dark at 65°F for 20 days. Oxygen uptake was measured at various intervals over the 20 day period by means of a Weston and Stack dissolved oxygen meter. The percentage degradation of test chemicals was determined to be 91% by O₂uptake parameter in 20 days. Thus, based on percentage degradation, test chemical was considered to be readily biodegradable in nature.
In a supporting weight of evidence study, biodegradation study was conducted according to OECD Guideline 301 C (Ready Biodegradability: Modified MITI Test (I)) for evaluating the percentage biodegradability of test chemical (from Kondo, M et. al., 1988 and secondary source). Initial test substance conc. used in the study was 20 mg/l. Namely, a water, acetone or DMSO solution (0.1 ml) of the test chemicals was added to a mixture of river/sea water (4.9 ml) from an unpolluted area and an autoclaved solution (5.0ml) of 0.2% peptone in a sterile test tube with a tight plug. After sealed with film and fixed at an angle of 30°in a dark box, the test tubes were incubated at 30°C and shaked at 120rpm. Inoculum used for the study was mixed culture obtained from different sources (Sea water from Enoshima Beach and River water from Tama River). The percentage degradation of test chemical in river and sea water was determined to be 100 and 54% by BOD parameter in 3 days. Thus, based on percentage degradation, test chemical was considered to be readily biodegradable in water.
On the basis of the above results, test chemical was considered to be readily biodegradable in water.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.