Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

General information:

Take persons to a safe place. Observe self-protection for first aid. Always seek medical advice in the event of contact with this substance. In the event of allergic reactions, particularly those affecting the respiratory system, seek immediate medical advice.

After contact with the eyes:

Rinse immediately with plenty of water for 10-15 minutes. Keep eyelids well open to rinse the whole eye surface and eyelids with water. Seek medical advice immediately and clearly identify substance. Continue to bathe eyes during transport to medical practitioner.

After contact with the skin:

Remove contaminated clothes at once. Wash off with plenty of water or water and soap immediately for 10-15 minutes. In serious cases, use emergency shower immediately. Seek medical advice immediately and clearly identify substance.

After inhalation:

Keep the patient calm. If unconscious place in stable sideways position. Protect against loss of body heat. If breathing stops, administer artificial respiration. Seek medical advice immediately and clearly identify substance.

After swallowing:

If conscious, give several small portions of water to drink. Do not induce vomiting. Seek medical advice immediately and clearly identify substance.

Most important symptoms and effects, both acute and delayed

Any relevant information can be found in other parts of this section.

Indication of any immediate medical attention and special treatment needed

      

After inhalation: treat as early as possible using cortisone spray. Product can lead to sensitisation and can trigger allergies.

Fire-fighting measures

Extinguishing media

Suitable extinguishing media:

alcohol-resistant foam , carbon dioxide , water mist , sprinkler system , sand , extinguishing powder .

Extinguishing media which must not be used for safety reasons:

water jet .

Special hazards arising from the substance or mixture

Risk of hazardous gasses or fumes in the event of fire. Exposure to combustion products may be a health hazard! Hazardous combustion produ       cts: toxic and very toxic fumes .

Advice for firefighters

Special protective equipment for fire fighting:

Use respiratory protection independent of recirculated air. Keep unprotected persons away.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

      

Secure the area. Wear personal protection equipment. Keep unprotected persons away. Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols. If material is released indicate risk of slipping. Do not walk through spilled material.

Environmental precautions

      

Prevent material from entering surface waters, drains or sewers and soil. Close leak if possible without risk. Contain any fluid that runs out using suitable material (e.g. earth). Retain contaminated water/extinguishing water. Dispose of in prescribed marked containers. Inform authorities if substance leaks into surface waters, sewerage or ground.

Methods and material for containment and cleaning up

      

Do not flush away with water. For small amounts: Absorb with a neutral (non-acidic / non-basic) liquid binding material such as diatomaceous earth and dispose of according to government regulations. Or: Convert small amounts with ammoniacal annihilator solution (45% water, 50% i-propanol, 5% conc. ammonia); decomposition takes place under formation of methanol. For large amounts: Liquids may be recovered using suction devices or pumps. If flammable, only air driven or properly rated electrical equipment should be used. Exhaust vapours.

Further information:

Exhaust vapours. Eliminate all sources of ignition. Consider explosion protection. Observe notes under section 7.

Reference to other sections

Relevant information in other sections has to be considered. This applies in particular for information given on personal protective equipment and on disposal.

Handling and storage

Precautions for safe handling

General information:

Avoid exposure by technical measures or personal protective equipment.

Precautions for safe handling:

Ensure adequate ventilation. Must be syphoned off in situ. Keep away from incompatible substances. Spilled substance increases risk of slipping. At each withdrawn superimpose with nitrogen, afterwards reseal containers carefully.

Precautions against fire and explosion:

Product can separate methanol. Flammable vapors may accumulate and form explosive mixtures with air in containers, process vessels, including partial, empty and uncleaned containers and vessels, or other enclosed spaces. Keep away from sources of ignition and do not smoke. Take precautionary measures against electrostatic charging. Cool endangered containers with water.

Conditions for safe storage, including any incompatibilities

Conditions for storage rooms and vessels:

Make sure there is no possibility of entering the ground.

Advice for storage of incompatible materials:

Observe local/state/federal regulations.

Further information for storage:

Protect against moisture. Store in original container only. Keep container tightly closed and store in a cool, well ventilated place.

Specific end use(s)

No data available.  

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
2810
Shipping information
Proper shipping name and description:
Giftiger organischer flüssiger Stoff, n.a.g.
Chemical name:
((Isocyanatomethyl)(dimethoxy)methylsilan)
Language:
German
Packing group:
Packing group II: Substances presenting medium danger
Labels:
6.1; Toxic substances
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
2810
Shipping information
Proper shipping name and description:
Giftiger organischer flüssiger Stoff, n.a.g.
Chemical name:
((Isocyanatomethyl)(dimethoxy)methylsilan)
Language:
German
Packing group:
Packing group II: Substances presenting medium danger
Labels:
6.1; Toxic substances
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
2810
Shipping information
Proper shipping name and description:
Toxic liquid, organic, n.o.s.
Chemical name:
((Isocyanatomethyl)(dimethoxy)methylsilane)
Packing group:
Packing group II: Substances presenting medium danger
Labels:
6.1; Toxic substances
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
2810
Shipping information
Proper shipping name and description:
Toxic liquid, organic, n.o.s.
Chemical name:
((Isocyanatomethyl)(dimethoxy)methylsilane)
Packing group:
Packing group II: Substances presenting medium danger
Labels:
6.1; Toxic substances
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters

Maximum airborne concentrations at the workplace:

CAS No.       Substance       Type       mg/m3       ppm       Dust fract.       Fibre/m3

      Isocyanatosilanes       ARW       0,005              

Isocyanatosilanes: ARW = Manufacturer’s occupational exposure limit value.

Exposure controls

Exposure in the work place limited and controlled

General protection and hygiene measures:

Avoid exposure - obtain special instructions before use. Observe standard industrial hygiene practices for the handling of chemical substances. Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols. Use with adequate ventilation. Preventive skin protection recommended. Keep away from foodstuff, drink and feedingstuff. Remove contaminated, soaked clothing immediately. Clean work areas regularly. Keep working clothes separately. Provide emergency shower and eye-bath. Do not eat, drink or smoke when handling.

Personal protection equipment:

Respiratory protection

If inhalative exposure above the occupational exposure limit cannot be excluded, adequate respiratory protection equipment must be used. Suitable respiratory equipment: Respirator with a full face mask, according to acknowledged standards such as EN 136.

Recommended Filter type: Gas filter type ABEK (certain inorganic, organic and acidic gases and vapors; ammonia/amines), according to acknowledged standards such as EN 14387

In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit. Suitable respiratory equipment: Respirator with a full face mask, according to acknowledged standards such as EN 136.

Recommended Filter type: Combined filter type ABEK-P2 (certain inorganic, organic and acidic gases and vapors; ammonia/amines; particles), according to acknowledged standards such as EN 14387

For long or intense exposure, use respiratory protective equipment. Suitable respiratory equipment: Positive pressure self contained breathing apparatus, according to acknowledged standards such as EN 137.

Observe the equipment manufacturer's information and wear time limits for respirators.

Eye protection

tight fitting protective goggles required . Where there is risk of splashing: protective shield . Provide work station with eye bathing equipment. Recommendation in case of long or strong exposure: look to respiratory protection .

Hand protection

Gloves are required at all times when handling the material.

Recommended glove types: Protective gloves made of butyl rubber & Viton®

thickness of the material: > 0,7 mm

Breakthrough time: > 480 min

Recommended glove types: Protective gloves made of 5-layer laminate of PE and EVOH (4H)

thickness of the material: > 0,062 mm

Breakthrough time: 120 - 240 min

Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Note that, due to the numerous external influences (such as temperature), a chemically resistant protective glove in daily use may have a service life that is considerably shorter than the measured break through time. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Rinse gloves immediately after use and remove. Wash hands with soap and water.

Skin protection

If handled uncovered: Chemical protective clothing, full-body liquid-tight protection if necessary. Please observe the instructions regarding permeability time which are provided by the supplier. Immediately decontaminate and change contaminated protective clothing.

Exposure to the environment limited and controlled

Prevent material from entering surface waters, drains or sewers and soil.

Further information for system design and engineering measures

Observe national regulatory requirements.

Stability and reactivity

Reactivity; Chemical stability; Possibility of hazardous reactions

If stored and handled in accordance with standard industrial practices no hazardous reactions are known.

Relevant information can possibly be found in other parts of this section.

Conditions to avoid

Moisture, heat, open flames, and other sources of ignition.

Incompatible materials

Possibility of polymerisation. Reacts with: water , basic substances or acids . The reaction takes place with the formation of carbon dioxide, methanol and heat.

Hazardous decomposition products

By hydrolysis: methanol .

Disposal considerations

Waste treatment methods

Material

Uncleaned packaging

Recommendation:

Completely discharge containers (no tear drops, no powder rest, scraped carefully). Containers may be recycled or re-used. Observe local/state/federal regulations. Uncleaned packaging should be treated with the same precautions as the material.