Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Description of first aid measures

- General advice: Take off all contaminated clothing immediately.

- If inhaled: Remove to fresh air. If symptoms persist, call a physician.

- In case of skin contact: After contact with skin, wash immediately with plenty of soap and water. If skin reactions occur, contact a physician.

- In case of eye contact: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

- If swallowed: If swallowed, seek medical advice immediately and show this container or label.

Fire-fighting measures

Extinguishing media

- Suitable extinguishing media: Any

- Unsuitable extinguishing media: none

Special hazards arising from the substance or mixture

- Specific hazards during firefighting: Fire may cause evolution of: Carbon monoxide (CO) Carbon dioxide (CO2) Nitrogen oxides (NOx) Hydrogen fluoride

- Further information: Prevent fire extinguishing water from contaminating surface water or the ground water system.

Advice for firefighters

- Special protective equipment for firefighters: In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

Accidental release measures

Personal precautions, protective equipment and emergency procedures

Use personal protective equipment.

Environmental precautions

Do not flush into surface water or sanitary sewer system.

Methods and materials for containment and cleaning up

Methods for cleaning up: Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13).

Reference to other sections

Additional advice: Avoid dust formation. Should not be released into the environment.

Handling and storage

Precautions for safe handling


Avoid dust formation. Use with local exhaust ventilation. Avoid contact with skin, eyes and clothing.

Take measures to prevent the build up of electrostatic charge. Keep away from open flames, hot surfaces and sources of ignition.

Conditions for safe storage, including any incompatibilities

For storage suitable stores with adequate product-reception volume must be used. During handling local official regulations must be observed in order to avert impairment of water by the product.

Specific end use(s)

No statements available.

Transport information

Land transport (UN RTDG/ADR/RID)

Shipping information
Proper shipping name and description:
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

Shipping information
Proper shipping name and description:
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shipping information
Proper shipping name and description:
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shipping information
Proper shipping name and description:
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

This intermediate is handled under Strictly Controlled Conditions in accordance with the ECHA REACH Guidance on Intermediates.  Site documentation to demonstrate safe handling arrangements in accordance with risk-based management systems is available at each Manufacturing site.

Personal protective equipment

Respiratory protection: respirator with P3 filter

Eye protection: safety glasses with side-shields

Hand protection: During the handling of the substance according to the intended use protection gloves from nitrile rubber have been proved. During the handling of pure solid substances or powder mixtures a permeation of the rubber material is not to be expected. In case of doubt, especially

during handling of the substance together with organic solvents, the stability of the protection gloves has to be clarified with the manufacturer.

Skin and body protection: Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Stability and reactivity

Condition to avoid: No data available

Materials to avoid: Oxidizing agents

Hazardous reactions: The product can cause dust explosions.

Disposal considerations

Product: Dispose of as special waste in compliance with local and national regulations