Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Eye Contact: Immediately flush eyes with water for at least 15 minutes. If irritation occurs or persists, get

medical attention.

Skin Contact: Remove clothing and wash affected skin with soap and water. This material may not be

completely removed by conventional laundering. Consult professional laundry service. Do not

home launder. If irritation occurs or persists, get medical attention.

Ingestion: Get medical attention. Never give anything by mouth to an unconscious person. Do not induce

vomiting unless directed by medical personnel.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. Get medical attention


Fire-fighting measures

Extinguishing Media: Use carbon dioxide, dry chemical, or water spray.

Special Hazards Arising from the Substance or Mixture Hazardous CombustionProducts: May emit oxides of carbon, nitrogen, and hydrogen cyanide.

Fire / Explosion Hazards: Fine particles (such as dust and mists) may fuel fires/explosions.

Advice for Fire-Fighters : Wear approved positive pressure, self-contained breathing apparatus and full protective turn out gear

Accidental release measures

Personal Precautions, Protective Equipment and Emergency Procedures:

Personnel involved in clean-up should wear appropriate personal protective equipment (see Section 8). Minimize exposure.

Environmental Precautions:

Place waste in an appropriately labeled, sealed container for disposal. Care should be taken to avoid environmental release.

Methods and Material for Containment and Cleaning Up Measures for Cleaning /Collecting:

Contain the source of spill if it is safe to do so. Collect spilled material by a method that

controls dust generation. A damp cloth or a filtered vacuum should be used to clean spills of

dry solids. Clean spill area thoroughly.

Additional Consideration for Large Spills:

Non-essential personnel should be evacuated from affected area. Report emergency

situations immediately. Clean up operations should only be undertaken by trained personnel

Handling and storage

Handling: Personel handing the substance will wear rubber gloves (14

inch PVC gauntlets), Tyvek suit and an air hood.

Storage: Store at ambient temperatures in closed containers away from


Packaging of the substance and or preparation: 60 litre fibre board drums, double lined with anti-static

polyethylene liners closed with a lever closing ring.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
UN 3077
Shippingopen allclose all
no data
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
UN number: UN 3077
Shippingopen allclose all
no data
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
UN number: UN 3077
Shipping information
Proper shipping name and description:
UN proper shipping name: Environmentally Hazardous Substance, Solid, n.o.s (substituted indole) Marine Pollutant
Chemical name:
No data
Marine pollutant
Special provisions / remarks
This material is regulated for transportation as a hazardous material/dangerous good

Air transport (UN RTDG/ICAO/IATA)

UN number:
UN number: UN 3077
Shipping information
Proper shipping name and description:
IATA Proper shipping name: Environmentally Hazardous Substance, Solid, n.o.s (substituted indole)
No data
Special provisions / remarks
Transport: Transport in sealed correctly labelled containers and
prevent from falling over.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Analytical Method: Analytical method available. Contact Pfizer Inc for further information.

Exposure Controls

Engineering Controls: Engineering controls should be used as the primary means to control exposures. Use process

containment, local exhaust ventilation, or other engineering controls to maintain airborne levels

below recommended exposure limits.

Personal Protective


Refer to applicable national standards and regulations in the selection and use of personal

protective equipment (PPE).

Hands: Wear impervious gloves as minimum protection.

Eyes: Wear safety glasses as minimum protection.

Skin: Wear impervious protective clothing when handling this compound.

Respiratory protection: If the applicable Occupational Exposure Limit (OEL) is exceeded, wear an appropriate

respirator with a protection factor sufficient to control exposures to below the OEL.

Stability and reactivity

Reactivity: No data available

Chemical Stability: Stable under normal conditions of use.

Possibility of Hazardous Reactions

Oxidizing Properties: Non-oxidizing

Conditions to Avoid: Fine particles (such as dust and mists) may fuel fires/explosions.

Incompatible Materials: Strong acids and bases

Hazardous Decomposition Products: No data available

Disposal considerations

Waste Treatment Methods:

Dispose of waste in accordance with all applicable laws and regulations. Member State

specific and Community specific provisions must be considered. Considering the relevant

known environmental and human health hazards of the material, review and implement

appropriate technical and procedural waste water and waste disposal measures to prevent

occupational exposure and environmental release. It is recommended that waste minimization

be practiced. The best available technology should be utilized to prevent environmental

releases. This may include destructive techniques for waste and wastewater