Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 500-097-4 | CAS number: 37353-75-6 1 - 4.5 moles propoxylated
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://poisoncentres.echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_ecotoxicological-information.png)
Toxicity to microorganisms
Administrative data
Link to relevant study record(s)
- Endpoint:
- activated sludge respiration inhibition testing
- Type of information:
- migrated information: read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- key study
- Study period:
- 29 December 2010 - 6 January 2011
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.11 (Biodegradation: Activated Sludge Respiration Inhibition Test)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- ISO 8192 (Water quality - Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation)
- Deviations:
- no
- GLP compliance:
- yes
- Analytical monitoring:
- no
- Vehicle:
- no
- Details on test solutions:
- The batch of LIN10001:4,4’-Isopropylidenediphenol, propoxylated tested was a white powder with lumps and a purity >95% in BPA 2 PO.
Since LIN10001:4,4’-Isopropylidenediphenol, propoxylated was hardly soluble in water test concentrations were prepared separately in Milli-RO water (tap water purified by reverse osmosis; Millipore Corp., Bedford, Mass., USA). Two 1-litre test bottles were filled with 250 ml of test substance mixtures with initial loading rates of 200 mg/l. These mixtures were stirred in closed dark brown bottles for 24½ hours. Subsequently, 16 ml synthetic sewage feed, 200 ml sludge and Milli-RO water up to 500 ml were added resulting in a loading rate of 100 mg/l (see also section 6.4). This loading rate was tested in duplicate. Optimal contact between the test substance and test organisms was ensured applying continuous aeration and stirring. - Test organisms (species):
- activated sludge of a predominantly domestic sewage
- Details on inoculum:
- The sludge was coarsely sieved, washed and diluted with ISO-medium. A small amount of the sludge was weighed and dried overnight at ca. 105°C to determine the amount of suspended solids (4.3 g/l of sludge, as used for the test). The pH was 7.8 on the day of testing. The batch of sludge was used one day after collection; therefore 50 ml of synthetic sewage feed was added per litre of activated sludge at the end of the collection day. The sludge was kept aerated at test temperature until use.
- Test type:
- static
- Water media type:
- freshwater
- Limit test:
- yes
- Total exposure duration:
- 3 h
- Post exposure observation period:
- Oxygen consumption was measured and recorded for approximately 10 minutes after the 3 hours exposure period.
- Test temperature:
- Between 19.4 and 20.0°C
- pH:
- Control series: 7.9
Test substance series: 7.7-7.8 - Dissolved oxygen:
- Oxygen consumption:
Controls series:57-58 mg O2/l/h
Test substance series: 42-43 mg O2/l/h
The oxygen concentration at the start of measurements was at least 5.6 mg O2/l - Nominal and measured concentrations:
- A loading rate of 100 mg/l, in duplicate
- Details on test conditions:
- TEST SYSTEM
- Type (delete if not applicable): open
- Material, size, headspace, fill volume: All glass, approximately 300 ml oxygen bottles (measuring) and
1 litre test bottles(exposure)
- Aeration:During exposure with clean, oil-free air
- No. of vessels per concentration (replicates):2
- No. of vessels per control (replicates):2/ series
- Biomass loading rate:1.7 g/l suspended solids in final test mixture
TEST MEDIUM / WATER PARAMETERS
- Source/preparation of dilution water: Tap-water purified by reverse osmosis (Milli-RO
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) : The respiration rate from each vessel, in mg O2/l/hr, was calculated from the linear part of the respiration curve, which was generally between 2.5 and 6.5 mg O2/l.
TEST CONCENTRATIONS
- Test concentrations: limit study at a loading rate of 100 mg/l - Reference substance (positive control):
- yes
- Remarks:
- 3,5-dichlorophenol
- Key result
- Duration:
- 3 h
- Dose descriptor:
- EC50
- Effect conc.:
- > 100 mg/L
- Nominal / measured:
- nominal
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Remarks on result:
- other: loading rate
- Details on results:
- 25 and 27% inhibition of respiration rate of the sludge was recorded at a loading rate of 100 mg LIN10001:4,4’-Isopropylidenediphenol, propoxylated per litre in the duplicate measurements. Therefore, no further testing was needed. Hence, the EC50 of LIN10001:4,4’-Isopropylidenediphenol, propoxylated exceeded a loading rate of 100 mg/l.
- Results with reference substance (positive control):
- Results with reference substance valid: yes
The inhibitory effect of 3,5-dichlorophenol on aerobic waste water (activated sludge) bacteria increased with increased with increasing concentration , ranging from a 36 % inhibition at 5.0 mg/l to 80% at 30 mg/l. Relevant effects levels: The EC50 of 3,5-dichlorophenol was: 8.1 mg/l. - Reported statistics and error estimates:
- For the reference substance the percentage inhibition was plotted against the logarithm of the concentrations and the EC50 was determined using linear regression analysis.
For LIN10001:4,4’-Isopropylidenediphenol, propoxylated no EC50 could be calculated because the test substance proved to be non-toxic (EC50 > 100 mg/l). - Validity criteria fulfilled:
- yes
- Conclusions:
- Under the conditions of this present test, LIN10001:4,4’-Isopropylidenediphenol, propoxylated was slightly toxic to waste water (activated sludge) bacteria at a loading rate of 100 mg/l (25 and 27% inhibition of respiration rate of the sludge). The 3-hour EC50 of LIN10001:4,4’-Isopropylidenediphenol, propoxylated exceeded a loading rate of 100 mg/l (based on nominal concentrations).
- Endpoint:
- activated sludge respiration inhibition testing
- Type of information:
- migrated information: read-across from supporting substance (structural analogue or surrogate)
- Adequacy of study:
- supporting study
- Study period:
- 2010
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study
- Reason / purpose for cross-reference:
- reference to other study
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.11 (Biodegradation: Activated Sludge Respiration Inhibition Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Analytical monitoring:
- no
- Vehicle:
- no
- Test organisms (species):
- activated sludge of a predominantly domestic sewage
- Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 3 h
- Test temperature:
- 20 +/- 2°C
- pH:
- 6 - 8
- Reference substance (positive control):
- yes
- Remarks:
- 3,5-dichlorophenol (3,5-DCP)
- Duration:
- 3 h
- Dose descriptor:
- other: EC20
- Effect conc.:
- 933 mg/L
- Nominal / measured:
- not specified
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Remarks on result:
- other: 95% CL = 430-2130 mg/L
- Key result
- Duration:
- 3 h
- Dose descriptor:
- EC50
- Effect conc.:
- > 1 000 mg/L
- Nominal / measured:
- not specified
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Duration:
- 3 h
- Dose descriptor:
- other: EC80
- Effect conc.:
- > 1 000 mg/L
- Nominal / measured:
- not specified
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Results with reference substance (positive control):
- The reference inhibitor 3,5-dichlorophenol (3,5-DCP)
was employed at 3, 10 and 32 mg/L, as a positive control. - Validity criteria fulfilled:
- yes
- Conclusions:
- Possible inhibition at highest concentration with EC 20 estimated to be 933 mg/L.
- Executive summary:
Possible slight inhibition at highest concentration, but significance of results not possible to determine.
- Endpoint:
- activated sludge respiration inhibition testing
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Study period:
- 2010
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Reason / purpose for cross-reference:
- reference to other study
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.11 (Biodegradation: Activated Sludge Respiration Inhibition Test)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Analytical monitoring:
- no
- Vehicle:
- no
- Test organisms (species):
- activated sludge of a predominantly domestic sewage
- Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 3 h
- Test temperature:
- 20 +/- 2°C
- pH:
- 6 - 8
- Reference substance (positive control):
- yes
- Remarks:
- 3,5-dichlorophenol (3,5-DCP)
- Duration:
- 3 h
- Dose descriptor:
- other: EC20
- Effect conc.:
- > 1 000 mg/L
- Nominal / measured:
- not specified
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Key result
- Duration:
- 3 h
- Dose descriptor:
- EC50
- Effect conc.:
- > 1 000 mg/L
- Nominal / measured:
- not specified
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Duration:
- 3 h
- Dose descriptor:
- other: EC80
- Effect conc.:
- > 1 000 mg/L
- Nominal / measured:
- not specified
- Conc. based on:
- test mat.
- Basis for effect:
- inhibition of total respiration
- Remarks:
- respiration rate
- Results with reference substance (positive control):
- The reference inhibitor 3,5-dichlorophenol (3,5-DCP) was employed at 3, 10 and 32 mg/L, as a positive control.
- Validity criteria fulfilled:
- yes
- Conclusions:
- No biologically significant inhibitory effect on respiration rate.
Referenceopen allclose all
Description of key information
The substance was found to be slightly toxic to microorganisms at tested concentrations.
Key value for chemical safety assessment
- EC50 for microorganisms:
- 100 mg/L
Additional information
Three studies were conducted to determine the toxicity of the substance to microorganisms. All studies investigated the effects of the substance on the respiration of activated sludge. The key study followed OECD Testing Guideline 209 using BPA 2PO. The 3 hour EC50 was found to be >100 mg/L. In the two supporting studies, both conducted in accordance with EU Testing Guideline C.11 the 3 hour EC50 was found to be >1000 mg/l using BPA 2PO and BPA 5PO.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)