Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 269-075-7 | CAS number: 68187-15-5 An inorganic pigment that is the reaction product of high temperature calcination in which praseodymium (III) oxide, praseodymium (IV) oxide, silicon oxide, and zirconium (IV) oxide in varying amounts are homogeneously and ionically interdiffused to form a crystalline matrix of zircon. Its composition may include any one or a combination of the modifiers alkali or alkaline earth halides.
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://poisoncentres.echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Acute Toxicity: inhalation
Administrative data
- Endpoint:
- acute toxicity: inhalation
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 1991-07-08 to 1991-07-22
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- Minor deviations without an effect on the results: - No acclimatisation period was stated. - According to the guideline, an inhalation equipment to substain a dynamic air flow of 12 to 15 air changes per hour should be used. In this report it was only stated that the air flow was 1,500 l/h. - According to the guideline, the duration of the exposure should be at least 4 hours after equilibrium of the chamber concentration. In this study it was not stated, if exposure started after an equilibration period. -According to the guideline, the equipment for measuring temperature should be stated, which was not done in this study.
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 1 992
- Report date:
- 1992
Materials and methods
Test guideline
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 403 (Acute Inhalation Toxicity)
- Deviations:
- yes
- Remarks:
- , see "rational for reliability"
- GLP compliance:
- yes
- Test type:
- standard acute method
- Limit test:
- yes
Test material
- Reference substance name:
- Zirconium praseodymium yellow zircon
- EC Number:
- 269-075-7
- EC Name:
- Zirconium praseodymium yellow zircon
- Cas Number:
- 68187-15-5
- Molecular formula:
- Pr(x)Zr(1-x)SiO4 0,03≤x≤0,09
- IUPAC Name:
- silicon(4+) zirconium(4+) λ⁴-praseodymium(4+) dipraseodymium(3+) nonaoxidandiide
- Test material form:
- solid
- Details on test material:
- - Name: Sicocer F Gelb 2214
- EC Name: Zirconium Praseodymium Yellow Zircon
- Substance type: inorganic pigment
- Physical state: solid, yellow powder, odourless
- Storage condition of test material: at room temperature
Constituent 1
Test animals
- Species:
- rat
- Strain:
- Wistar
- Sex:
- male/female
- Details on test animals or test system and environmental conditions:
- TEST ANIMALS
- Source: Dr. K. Thomae GmbH, D-W7950 Biberach, FRG)
- Age at study initiation: approx. 8-9 weeks
- Weight at study initiation: mean weight males: 305 +/- 2.8 g; mean weight females: 198 +/- 7.6 g
- Housing: Rats were housed singly in cages type DK III of becker, without bedding.
- Diet (ad libitum during the post exposure period): KIBA rat/mouse/hamster laboratory diet 24-343-4 10 mm pellets, Klingentalmühle AG, CH4303 Kaiseraugst, Switzerland
- Water (ad libitum during the post exposure period): drinking water
ENVIRONMENTAL CONDITIONS
- Temperature: 20 -24 °C
- Relative humidity: 30 - 70 %
- Photoperiod (hrs dark / hrs light): 12/12
Administration / exposure
- Route of administration:
- inhalation: dust
- Type of inhalation exposure:
- nose/head only
- Vehicle:
- other: 1 wt% Aerosil
- Mass median aerodynamic diameter (MMAD):
- 2.7 µm
- Geometric standard deviation (GSD):
- 3.9
- Details on inhalation exposure:
- GENERATION OF TEST ATMOSPHERE / CHAMBER DESCRIPTION
- Exposure apparatus: Head-nose inhalation system INA 20 (glass-steel construction, BASF Aktiengesellschaft, volume V approx. 55 l): the animals were restrained in tubes and their snouts projected into the inhalation chamber.
- System of generating particulates/aerosols: The aerosol was produced with a dosing-wheel dust generator (Gericke/BASF) and compressed air. The concentration was adjusted by varying the rotation of the metering disc. An air flow rate (supply air) of 1,500 l/h was set.
By means of an exhaust air system the pressure ratios in the inhalation system were adjusted in such a way that the amount of exhaust air was about 10 % lower (excess pressure). This ensured that the mixture of test substance and air was not diluted with laboratory air in the breathing zones of the animals.
- Method of particle size determination: 30 minutes after the beginning of the test at the earliest, one sample was taken per test group for the particle size analysis.
Before the sampling, the impactor was equipped with glass-fiber collecting discs and a backup particle filter. The impactor was connected to the pump and the test apparatus, and one sample (9 l) was taken.
The impactor was taken apart, and the collecting discs and the backup particle filter were weighed.
The content of the pre-impactor as well as the amounts of the material adsorbed on the walls of the impactor and in the sampling probe (wall losses) were also determined quantitatively.
Equipment:
-Stack Sampler Mark III (Andersen)
- Vacuum Compressed Air Pump (Millipore)
-Sampling probe (internal diameter 6.9 mm)
- Balance: Sartorius M3P and Mettler AE 240
- Evaluation unit (IBM-PC with software PGA)
- Method of determination of the nominal concentration: The nominal concentration was calculated from the amount of substance consumed and the air flow.
- Temperature, humidity, pressure in air chamber: The humidity in the inhalation system was not measured due to technical reasons. It is assumed that deviations of humidity values from the guideline requirements (especially low humidity in dust aerosol) did not influence the test results, because of the relative short exposure time.
The temperature in the inhalation system was measured continuosly and recorded once.
TEST ATMOSPHERE
- Brief description of analytical method used: Gravimetric determination of the inhalation atmosphere concentration (Equipment: balance: Mettler AT 250). The preweighed filter was placed into the filtration equipment. By means of a vacuum compressed air pump a volume of the dust aerosol was drwan through the filter.
The dust concentration in mg/l was calculated from the difference between the preweight of the filter and the weight of the filter after sampling, with reference to the sample volume of the inhalation atmosphere.
Apparatus:
- Vacuum compressed air pump (Millipore)
- Filtration equipment with probe, internal diameter: 4 mm, (Millipore)
- Filter: MN 85/90 Bf (d = 4.7 cm)
- Sampling velocity: 1.25 m/s
- Sampling amount: 2 l
-Sampling frequency: 1 sample about hourly
- Samples taken from breathing zone: yes
VEHICLE
- Justification of choice of vehicle: The test substance was mixed with 1 wt % Aerosil in order to achieve a more uniform dus concentration in air.
TEST ATMOSPHERE
- MMAD/GSD: 2.7 µm (GSD: 3.9) - Analytical verification of test atmosphere concentrations:
- yes
- Remarks:
- see "details on inhalation exposure" above
- Duration of exposure:
- 4 h
- Concentrations:
- Nominal concentration: 36.7 mg/l
Actual concentration: 5.5 +/- 0.82 mg/l - No. of animals per sex per dose:
- 5 males / 5 females
- Control animals:
- no
- Details on study design:
- - Duration of observation period following administration: 14 days
- Frequency of observations and weighing: The body weight of the animals was checked before the beginning of the test, after 7 days and at the end of the observation period. Clinical findings were recorded for each animal separately several times during the exposure and at least once each workday in the observation period. A check for dead animals was made daily.
- Necropsy of survivors performed: Yes
At the end of the 14-day observation period the animals were sacrificed with CO2 and were subjected to gross-pathological examination. - Statistics:
- The statistical evaluation of the dose-response relationship was carried out using FORTRAN program AKPROZ. Depending on the data of the dose-response relationship obtained by way of experiment, this program is used to estimate the LC50 or to perform a Probit analysis (FINNEY, D.J. (1971): "Probit Analysis", Cambridge University Press). Estimation of the LC50 will produce types LC50 greater, LC50 about, or LC50 smaller. If the results are Type LC50 greater or LC50 smaller, an additional binominal test will be carried out (WITTING, H. (1974): "Mathematical Statistik" B.G. Teubner, Stuttgart, pp. 32 -35), in order to verify these statements statistically, if necessary.
The calculation of the particle size distribution was carried out in the Department of Toxicology of BASF Aktiengesellschaft on the basis of mathematical methods for evaluating particle measurements (DIN 66141: Darstellung von Korngrößenverteilungen, DIN 66151: Partikelgrößenanalyse (Beuth-Vertrieb GmbH, D-W1000 Berlin 30 and D-5000 Köln 1).
Results and discussion
Effect levels
- Key result
- Sex:
- male/female
- Dose descriptor:
- LC50
- Effect level:
- > 5.5 mg/L air (analytical)
- Based on:
- test mat.
- Exp. duration:
- 4 h
- Remarks on result:
- other: The statistical reliability = 99 %.
- Mortality:
- No mortaility occurred at the limit concentration of 5.5 mg/l.
- Clinical signs:
- other: No abnormalities were detected in the animals of the test groups during exposure and post-exposure observation period. There was only a discolouration of the fur after termination of the exposure.
- Body weight:
- Body weight gain was influenced neither in male nor in female animals over the whole test period.
- Gross pathology:
- During necropsy no pathologic findings were noted.
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- No mortality occured at the limit concentration of 5.5 mg/l. Therefore the LC50 is > 5.5 mg/l.
According to the EC Regulation No. 1272/2008 and subsequent regulations, the test item is not classified as acute toxic by the inhalation route.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)