Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 252-068-8 | CAS number: 34513-98-9
Guidance on Safe Use
Administrative data
First-aid measures
4.1 Description of first aid measures
General advice:
Move out of dangerous area.
Consult a physician.
Show this safety data sheet to the doctor in attendance.
Do not leave the victim unattended.
If inhaled:
Move to fresh air.
If symptoms persist, call a physician.
If unconscious, place in recovery position and get medical attention immediately.
In case of skin contact:
Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficul-ty.
Wash contaminated clothing before reuse.
If on skin, rinse well with water.
If on clothes, remove clothes.
In case of eye contact:
Small amounts splashed into eyes can cause irreversible tis-sue damage and blindness.
Remove contact lenses.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Continue rinsing eyes during transport to hospital.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.
If swallowed:
Clean mouth with water and drink afterwards plenty of water.
Keep respiratory tract clear.
Do NOT induce vomiting.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Take victim immediately to hospital.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms
:
Skin contact may provoke the following symptoms:
Burn
corrosive effects
Redness
Eye contact
Excessive lachrymation
4.3 Indication of any immediate medical attention and special treatment needed
No information available.
Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media:
Water mist
Water spray jet
Foam
Carbon dioxide (CO2)
Dry chemical
Unsuitable extinguishing media:
High volume water jet
5.2 Special hazards arising from the substance or mixture
Specific hazards during fire-fighting:
Do not allow run-off from fire fighting to enter drains or water courses.
Hazardous combustion prod-ucts:
Metal oxides
Nitrogen oxides (NOx)
5.3 Advice for firefighters
Special protective equipment for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.
Further information:
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
For safety reasons in case of fire, cans should be stored sepa-rately in closed containments.
Use a water spray to cool fully closed containers.
Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Personal precautions:
Use personal protective equipment.
Avoid dust formation.
Evacuate personnel to safe areas.
6.2 Environmental precautions
Environmental precautions:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform respective authorities.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up:
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13).
Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
Handling and storage
7.1 Precautions for safe handling
Advice on safe handling:
Avoid formation of respirable particles.
Do not breathe vapours/dust.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-plication area.
Dispose of rinse water in accordance with local and national regulations.
Advice on protection against fire and explosion:
Avoid dust formation. Provide appropriate exhaust ventilation at places where dust is formed. Keep away from combustible material.
Hygiene measures:
When using do not eat or drink. When using do not smoke.
Wash hands before breaks and at the end of workday.
7.2 Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers:
Prevent unauthorized access. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leak-age. Observe label precautions. Electrical installations / work-ing materials must comply with the technological safety stand-ards. To maintain product quality, do not store in heat or direct sunlight.
Storage class (TRGS 510):
5.1A, Strongly oxidizing hazardous materials
Other data:
Keep in a dry place. No decomposition if stored and applied as directed.
7.3 Specific end use(s
Transport information
Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all
Marine transport (UN RTDG/IMDG)
Shippingopen allclose all
Remarksopen allclose all
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all
Exposure controls / personal protection
8.1 Control parameters
Contains no substances with occupational exposure limit values.
8.2 Exposure controls
Engineering measures
Handle only in a place equipped with local exhaust (or other appropriate exhaust).
Personal protective equipment
Eye protection:
Safety glasses with side-shields conforming to EN166
Hand protection
Material:
Nitrile rubber
Break through time:
> 240 min
Glove thickness:
0,38 mm
Skin and body protection:
Choose body protection according to the amount and concen-tration of the dangerous substance at the work place.
Respiratory protection:
ABEK-P3-filter
Filter type:
Combined particulates, inorganic and acidic gas/vapour, am-monia/amines and organic vapour type (ABEK-P)
Stability and reactivity
10.1 Reactivity
10.2 Chemical stability
No decomposition if stored and applied as directed.
10.3 Possibility of hazardous reactions
Hazardous reactions
:
No decomposition if stored and applied as directed.
10.4 Conditions to avoid
Conditions to avoid:
Heat, flames and sparks.
10.5 Incompatible materials
10.6 Hazardous decomposition products
Disposal considerations
13.1 Waste treatment methods
Product:
Do not dispose of waste into sewer.
Dispose of in accordance with the European Directives on
waste and hazardous waste.
In accordance with local and national regulations.
Do not contaminate ponds, waterways or ditches with chemi-cal or used container.
According to the European Waste Catalogue, Waste Codes are not product specific, but application specific.
Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.
Send to a licensed waste management company.
Contaminated packaging:
Empty remaining contents.
Dispose of as unused product.
Do not re-use empty containers.
Do not burn, or use a cutting torch on, the empty drum.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
