Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 274-550-7 | CAS number: 70304-38-0
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://poisoncentres.echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 6.1.2017 - 20.1.2017
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 017
- Report date:
- 2017
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- Version / remarks:
- Adopted: 28th July, 2015
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Version / remarks:
- Commission Regulation (EC) No. 761/2009, 23rd July 2009
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Trisodium [5-[[4-[(3-chloro-2-hydroxy-5-sulphophenyl)azo]-3-hydroxyphenyl]azoxy]-2-[2-(4-nitro-2-sulphophenyl)vinyl]benzenesulphonato(5-)]cuprate(3-)
- EC Number:
- 274-550-7
- EC Name:
- Trisodium [5-[[4-[(3-chloro-2-hydroxy-5-sulphophenyl)azo]-3-hydroxyphenyl]azoxy]-2-[2-(4-nitro-2-sulphophenyl)vinyl]benzenesulphonato(5-)]cuprate(3-)
- Cas Number:
- 70304-38-0
- Molecular formula:
- UVCB
- IUPAC Name:
- trisodium [5-[[4-[(3-chloro-2-hydroxy-5-sulphophenyl)azo]-3-hydroxyphenyl]azoxy]-2-[2-(4-nitro-2-sulphophenyl)vinyl]benzenesulphonato(5-)]cuprate(3-)
- Reference substance name:
- Sodium chloride
- EC Number:
- 231-598-3
- EC Name:
- Sodium chloride
- Cas Number:
- 7647-14-5
- Molecular formula:
- ClNa
- IUPAC Name:
- sodium chloride
- Test material form:
- solid: granular
- Details on test material:
- Other name:C.I. Direct Brown 103 CAS No.:70304-38-0 EC Number:274-550-7 Mw: 880.55 Batch No.: 7016/2007 Stability/Expiration date: Unlisted
Constituent 1
impurity 1
In vitro test system
- Test system:
- human skin model
- Source species:
- human
- Cell type:
- non-transformed keratinocytes
- Cell source:
- other: tissue for research puposes from accredited institutions
- Source strain:
- other: Keratinocyte strain 00267
- Vehicle:
- unchanged (no vehicle)
- Details on test system:
- RECONSTRUCTED HUMAN EPIDERMIS (RHE) TISSUEthe reconstructed human epidermal model EpiDerm (EPI-200 ver. 2.0, MatTek, Bratislava, Slovakia); Lot No. 23388, kit ETEMPERATURE USED FOR TEST SYSTEMculture conditions 37±1°C, 5±1 % CO2, moistened tissueREMOVAL OF TEST MATERIAL AND CONTROLS- Volume and number of washing steps: thoroughly rinsed with PBS- Observable damage in the tissue due to washing: After rinsing, tissues remained uneven coloured brown. The tissue with the lowest OD570 was pierced at rinsing what could have influence on lower intensity of its colouring at MTT test.MTT DYE USED TO MEASURE TISSUE VIABILITY AFTER TREATMENT / EXPOSURE- MTT concentration: 1 mg·mL-1- Incubation time: 185 min- Spectrophotometer: Libra S22 at 570 nm. Isopropyl alcohol serves as a blank. Allowed band width is 2-3 nm. No external filter was used.FUNCTIONAL MODEL CONDITIONS WITH REFERENCE TO HISTORICAL DATABased on Certificate of Analysis the model passed all parametres for viability, barrier function, sterility.NUMBER OF REPLICATE TISSUES: 3NUMBER OF INDEPENDENT TEST SEQUENCES / EXPERIMENTS TO DERIVE FINAL PREDICTION:1. Direct MTT reduction - functional check in tubes2. Colour interference 3. MTT testPREDICTION MODEL / DECISION CRITERIAOECD Test Guideline No. 439 (1), par. 36:- In case the test chemical is found to be non-corrosive (e.g., based on TG 430, 431 or 435), and shows tissue viability after exposure and post-treatment incubation is less than or equal (≤) to 50%, the test chemical is considered to be irritant to skin in accordance with UN GHS (3) Category 2. - The test chemical may be considered as non-irritant to skin in accordance with UN GHS No Category if the tissue viability after exposure and post-treatment incubation is more than (>) 50%.
- Control samples:
- yes, concurrent negative control
- yes, concurrent positive control
- Amount/concentration applied:
- The test substance (25 mg of substance/surface ratio 39.7 mg/cm2) was placed directly on tissue moistened with 25 µL of PBS. The material was spread on the tissue surface.NC: sterile PBS (phosphate buffered saline) MatTek 092316MHEPC: 5 % SDS (sodium dodecyl sulphate), MatTek, Lot No. 111516ZSA
- Duration of treatment / exposure:
- 60±1 minutes (25 minutes at room temperature and the remaining 35 minutes at culture conditions)
- Duration of post-treatment incubation (if applicable):
- After 24±2 hours incubation period, the medium is replaced by fresh one. Tissues are incubated for another 18±2 hours (post-treatment incubation).
- Number of replicates:
- 3
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- % tissue viability
- Run / experiment:
- 1
- Value:
- 60.9
- Negative controls validity:
- valid
- Positive controls validity:
- valid
- Other effects / acceptance of results:
- After rinsing, tissues remained uneven coloured brown. The tissue with the lowest OD570was pierced at rinsing what could have influence on lower intensity of its colouring at MTT test.The mean OD570 of the NC tissue was 2.004 ±0.047 which meets the acceptance criteria of ≥ 0.8 and ≤ 2.8.The mean viability of the PC tissues expressed as % of the negative control tissues is 2.4% which meets the acceptance criterion of ≤ 20 %. The SD calculated from individual % tissue viabilities of the 3 identically treated replicates for the positive control, negative control and test substance was 12.4 what is < 18 %.All study acceptance criteria were fulfilled.
Any other information on results incl. tables
Direct MTT reduction: functional check in tubes
25 mg ofthe test substance was addedto 1.0 mL of MTT medium. Suspension was incubated for 1 hour at culture conditions. After incubation, the medium was coloured red-brown. The test substance does not reduce MTT directly.
Colour interference
The test substance is soluble in water for injection. OD570 of solution in water for injection was > 3 what is > 0.08.
The test substance is not soluble in isopropyl alcohol. Average OD570 value from 2 wells was 0.005 what is < 0.08.
It means that the test substance will go well washed from the tissue and any residue is not dissolved in isopropyl alcohol. On the basis of results obtained, it was decided do not use concurrent colorant control in the MTT test.
MTT test:
OD570values obtained at the MTT test, their averages, standard deviations (%) and relative viabilities
| Treatment | OD570 | Avg | SD | Average viability | ||
| 1 | 2 | 3 |
|
| (% NC) | |
NC
| PBS | 2.022 | 1.940 | 2.050 | 2.004 | 0.047 | 100.0 |
% | 100.9 | 96.8 | 102.3 | 100.0 | 2.33 | ||
C3
| 392/16 | 1.366 | 1.427 | 0.871 | 1.221 | 0.249 | 60.9 |
% | 68.2 | 71.2 | 43.5 | 60.9 | 12.42 | ||
PC
| 5% SDS | 0.044 | 0.051 | 0.050 | 0.048 | 0.003 | 2.4 |
% | 2.2 | 2.5 | 2.5 | 2.4 | 0.15 |
Applicant's summary and conclusion
- Interpretation of results:
- GHS criteria not met
- Conclusions:
- Under the above-described experimental design, average viability of tissues treated by the test substance Direct Brown 103 was 60.9 % of negative control average value, i.e. viability was > 50 %. The effect of the test item was negative in EpiDermTM model (tissues were not damaged).According to the classification criteria, the test substance, Direct Brown 103, is considered to have no category in accordance with UN GHS and is therefore considered a non-irritant.
- Executive summary:
The test item, Direct Brown 103, was assayed for the in vitro skin irritation in human epidermal model EpiDermTM. The test was performed according to the OECD Test Guideline No. 439: In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method test (2015) and Protocol for: In Vitro EpiDermTMSkin Irritation Test For use with MatTek Corporation’s Reconstructed Human Epidermal Model EPI-200-SIT.
In the preliminary experiments neither colour interference with the endpoint nor direct MTT reduction were found.
After pre-incubation of tissues, 25 mg of the test substance was placed directly atop to the previously moistened tissue and it was spread on the entire tissue surface. The length of exposure was 60 minutes. Three tissues were used for the test substance and for positive and negative controls.
After removal of the test substance, tissues were post-incubated for approximately 42 hours. Three hours incubation with MTT and two hours extraction period with shaking followed then. Optical density (OD570) of isopropyl alcohol extracts was measured on a spectrophotometer. Relative cell viability was calculated for each tissue as % of the mean viability of the negative control tissues.
Under the above-decribed experimental design, average viability of tissues treated by the test substance was 60.9 %, i.e. viability was > 50 %.
The effect of the test substance was negative in EpiDermTMmodel (tissues were not damaged).
According to the classification criteria, the test substance, Direct Brown 103, is considered to have no category in regard to skin irritation.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)