Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove patient to fresh air, seek medical attention.

Emergency measure - Eyes: Flush eyes with water for at least 15 minutes. Seek medical

attention if irritation occurs.

Emergency measure - Skin: Remove contaminated clothing and wash affected skin with

soap and water.

Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Extinguish with foam or C02. Do not use water.

Product arising from burning: The substance is combustible and will burn if involved in a

fire, evolving noxious fumes (eg. carbon oxides).However,

there is no experimental evidence to support the

anticipated combustion products.

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing

apparatus must be worn.

Accidental release measures

Emergency measures in case of spillage: Wear appropriate personal protective equipment conforming to

the relevant national or international standard.

Absorb spillages of solutions with a suitable inert material

(eg sand or soil). Carefully transfer the spillage to waste

containers or use a sealed industrial vacuum machine.

Containers filled with waste material must be labelled in

the same way as the original containers.

Clean the spillage area with copious amounts of water.

Dispose of waste material by incineration in accordance with

local regulations.

If incineration is not possible, treatment with bleach or

other oxidising agent, followed by dilution in water to <

0.1% should be accpetable.

Handling and storage

Handling: The substance should be stored, handled and used in

conditions of good industrial hygiene and in conformity with

any local regulations in order to avoid exposure.

Engineering controls are necessary to reduce exposure to the


When exposure cannot be prevented or adequately controlled,

appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate

international or national standards: Chemcial protective

gloves, chemical resistant clothing, eye protection, foot

protection and respiratory protection (when needed) are the

minimum requirements.

Storage: Store at -20 to + 4 degrees C in a dry, well-ventilated

area away from sources of heat and light. Keep containers

tightly closed when not in use.

Packaging of the substance and or preparation: Aluminium cans, small samples (< 6 g) in glass sample


Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

Shippingopen allclose all
Special provisions / remarks
Transport: Not regulated
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: Avoid contactwith acids, alkali and stong oxidisers

Chemical reaction with water: None which is hazardous.

Dust explosion: Not applicable

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Discharge to the environment will be minimal. Recovery from

minor spillages or accidental discharge is not economically

or technically feasible, and such waste material will be

disposed of by incineration.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is

considered hazardous to health. There are no known methods

for neutralisation of this harmful effect.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with

inert material (eg. sand or soil) should not normally be

disposed of by landfill.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning

under controlled conditions at a licensed waste treatment

processor in accordance with local regulations. Stack gases

should be scrubbed, because noxious fumes (eg. carbon and

sulfur oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to

the sewage system or the aqueous environment. However,

adverse effects on sewage treatmnet systems would be

unlikley following treatment and dilution.

Industry - Possibility of destruction - other: None

Public at large - Possibility of recovery/recycling: Recovery for reuse is not possible.

Public at large - Possibility of neutralisation: Not applicable.

Public at large - Possibility of destruction: controlled discharge: Not applicable.

Public at large - Possibility of destruction - incineration: Not applicable.

Public at large - Possibility of destruction - water purification: Not applicable

Public at large - Possibility of destruction - others: Not applicable