Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 284-009-7 | CAS number: 84776-83-0
Density
Administrative data
Link to relevant study record(s)
- Endpoint:
- density, other
- Remarks:
- Quantachrome MVP-2 gas comparison pycnometer
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- July 2005
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 109 (Density of Liquids and Solids)
- Deviations:
- not specified
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- other: Quantachrome MVP-2 gas comparison pycnometer
- Specific details on test material used for the study:
- Test Material Description:
- Sponsor's Identification: Sylvalite® RE 80 HP
- Description: pale yellow solid
- Batch Number: E4B80072
- Date received: 01 October 2004
- Storage Conditions: Room Temperature, in the dark - Key result
- Type:
- other: gas comparison pycnometer
- Density:
- ca. 1 070 kg/m³
- Temp.:
- 19.8 °C
- Conclusions:
- The density of the test material Sylvalite® RE 80HP has been determined to be 1070 kg/m3 at 19.8 ± 0.5 °C.
- Executive summary:
The density of the test material Sylvalite® RE 80HP was determined using a gas comparison pycnometer, Method 109 of the OECD Guidelines for Testing of Chemicals, 27 July 1995. The test was carried out using a Quantachrome MVP-2 gas comparison pycnometer.
The density was determined to be 1070 kg/m3 at 19.8 ± 0.5 °C, under the condition of this test.
Reference
The pressure reading, calculated volumes and density values obtained for the test material are shown in the following table:
Determination |
P1 |
P2 |
Volume (cm3) |
Density (kg/m3) |
A |
17.020 |
7.608 |
36.7 |
1070.0 |
B |
17.313 |
7.640 |
34.1 |
1066.5 |
Temperature: 19.8 ± 0.5 °C
Mean density: 1070 kg/m3
Description of key information
The density of the test material Sylvalite® RE 80HP was determined using a gas comparison pycnometer, Method 109 of the OECD Guidelines for Testing of Chemicals, 27 July 1995. The test was carried out using a Quantachrome MVP-2 gas comparison pycnometer.
The density was determined to be 1070 kg/m3 at 19.8 ± 0.5°C, under the conditions of this test.
Key value for chemical safety assessment
- Relative density at 20C:
- 1.07
Additional information
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
