Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 231-141-8 | CAS number: 7440-31-5
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://poisoncentres.echa.europa.eu/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_ecotoxicological-information.png)
Toxicity to microorganisms
Administrative data
Link to relevant study record(s)
Description of key information
No effects were observed up to 511 mg/L precipitated tin (IV) hydroxides which is equivalent to 1000 mg/L tin (IV) chloride pentahydrate. OECD 209, Clark (2010)
Key value for chemical safety assessment
- EC10 or NOEC for microorganisms:
- 511 mg/L
Additional information
A respiration inhibition test completed by VITO in 2010 used tin (IV) chloride solutions and encountered interfering effects from pH change. Two preliminary range finding tests were performed: the first (RIT09001) without any adaptation of pH and the second (RIT09002) with adjusted back to circumneutral values. Adjusting the pH from acid to neutral values caused opaqueness in the freshly prepared dilutions at the highest concentrations. The pH in the test vessels for RIT09001 ranged from 2.42 to 7.03.
In the first range finding test (RIT09001), toxic effects were seen with a calculated EC50 of 201 mg/L SnCl4.5H2O. However, a steep pH shift was seen in the EC50 range with EC50 pH being 4.5. In the pH adapted second range finding test no toxicity was observed (EC50 > 1000 mg/L SnCl4.5H2O).
These two experiments showed that the pH effect is the cause of toxicity either by increased bioavailability and/or by direct pH effects on sludge respiration. The optimal pH range for sludge activity is 6 -8. Below and above these figures respiration is inhibited.
In the third test (RIT09003), no pH adaptation was used and the concentration range tested narrowed to 50 to 200 mg/L SnCl4.5H2O. Unexpectedly, no effects on pH or toxicity were seen. In test RIT09001 the pH was 4.5 at 200 mg/L loading but was 7.14 in RIT09003.This illustrates how different batches of activated sludge can have varying buffering characteristics. The test was repeated again (RIT09003bis) using a range of 100 to 500 mg/L with no pH adaptation and toxic effects were seen with an EC50 of 232 mg/L SnCl4.5H2O.
SnCl4.5H2O has a negative effect on the respiration rate of activated sludge and the effect is related to the acidifying properties of the test material. This study may be useful for providing data on the environmental hazards of SnCl4.5H2O. However, the purpose of the study was to assess the effect of tin ions arising from the dissolution of tin metal on microrganisms and this study provides little useful data to inform that assessment. The maximum dissolved tin that can be achieved with a 100 mg/L loading of the finest tin powder is 31 µg/L (CIMM 2010). Therefore, no effects on microrganisms will be seen directly from that concentration of dissolved tin. 31 µg/L of dissolved tin will also have no material effect on the pH of activated sludge.
To overcome these methodological difficulties and to investigate the potential for precipitated tin hydroxides arising from dissolved tin to cause adverse affects on micro-organisms a different sample introduction process was adopted in the Harlan 2010 study. Amounts of tin (IV) chloride pentahydrate were dispersed into dechlorinated tap water and allowed to precipitate. The precipitated tin material ( assumed to be tin hydroxides) was washed to minimise any pH effects from residual tin (IV) chloride, dried and weighed. The filter paper (GF/A grade) together with the weighed mass of precipitated tin hydroxide was then added to the test vessel.
No effects were observed up to 511 mg/L precipitated tin (IV) hydroxides which is equivalent to 1000 mg/L tin (IV) chloride pentahydrate. A separate study was undertaken (ITRI 2010) to characterise the dried precipitated material. The precipitated material was found to contain 72% Sn.
The overall objective of the sludge respiration testing is to provide data on the hazard to micro-organisms at sewage treatment works or related scenarios arising from the dissolution of soluble ions from tin metal followed by their subsequent precipitation. Tin solutions are not stable at concentrations above a few tens of micrograms per litre and will form precipitates at higher concentrations. In practice, the risk of mg/L quantities of precipitated tin compounds developing from solubilised tin is small as the maximum soluble tin formed from 100 mg/L finely powdered tin is 31 µg/L (CIMM 2010).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)